Anchor Expanding 8-Way

Anchor Expanding 8-Way image

Get Latest Price Request a quote

Quick Details

Product Name:

Anchor Expanding 8-Way

Model NO.:

A2 Type

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

73269090

Product Details

Eight point top plate blade expands with

the base plate upon screwing the anchor rod down

to form a cone shaped square which distribute the

anchor’s holding power into the ground.

FORGED EYE SHAFT

SCREW ANCHOR

Hot Dip Galvanized

4	Material name		Splice plenary traction ACSR -AAAC No. 2 AWG
5	Splicing standards		ANSI C119.4, ASTM D 566
6	Splice class		TO
7	Raw material of the driver		Aluminium alloy
8	Pre-insulated compression splice design		The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filled with inhibitor compound.
9	Splice fabrication		The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
10	Finish		The joint must not present cracks, cavities, welds superficial or internal defects, or Any other that may affect its proper functioning.
11	Calibers of drivers		ACSR 2
12	Diameter of the driver	mm	8.05
13	Splice length	mm	300 to 320
14	Central diameter of splice	mm	25
15	Maximum tension	dAN	1,150
16	Color		Red
17	The splice nozzles must present		a sealing plug that prevents the moisture entry and agents external to its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat within the splice during transport and storage
18	DN-DS certificate		Attach acceptance certificate and homologation
19	Identification Mark		You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press
20	Packaging		The hose couplings of Pre-insulated compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

Forged Eye Shaft Screw Anchors can be

installed manually by inserting a bar through the eye

and screwing the anchor down

ANCHOR ASSEMBLY

Hot Dip Galvanized

Forged Thimble eye, Twin Eye and Triple Eye

Anchor Rods are used for guying with expanding,

cross plate, cone and screw anchors as well as

anchor log assemblies.

GUY ATTACHMENT

Hot Dip Galvanized

Guy Attachment provides an economical

and efficient means of fastening guy to pole, either

steel or wood poles.

The press formed steel guy attachment has a well

rounded strand groove that would protect the strand

from damage.

Hot Dip Galvanized

Eyelet are drop forged from rolled basic open

hearth steel and are compatible with the strength of

the bolts used with them.

Angle Thimble Eyelet are used for down guys and

straight thimble eyelet is used for span guys.forged steel Guy Attachment are

designed for direct pole installation for glass and

wood strain insulators.

Tension Clamp For Aluminium Conductor
                TECHNICAL SPECIFICATION
1. SCOPE
    This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
     The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2.             STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
                  Overhead Power Lines
BS 729         – Hot dip Galvanised
3.             ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4.             DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5.             SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a.                 50mm² Alu. Conductor
b.                 100 – 150mm² Alu. Conductor
6.             MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7.             INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a.                 A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729