Forged Eye Shaft Screw Anchor
Forged Eye Shaft Screw Anchor image
Get Latest Price Request a quote
Quick Details
Product Details
ANCHOR ASSEMBLY
GUY ATTACHMENT
Single slot anchor rod 5/8 "X 7 ‘ | |
Steel | |
ASTM A-153, ANSI C-135.2 | |
ISO-9001 or recent | |
Galvanized in hot dip, free of imperfections |
|
You must present the symbol of manufacturer’s identification and burst load |
|
inch(mm) | 5/8(0.625) |
ft(inch) | 7(84) |
inch(mm) | 4(101.6) |
inch(mm) | 1/4(6.35) |
inch(mm) | 1-1/2(38.1) |
inch(mm) | 11/16(17.46) |
inch(mm) | 9/16(14.28) |
inch(mm) | 1-3/8(34.92) |
lbs | 16,000 |
lbs | 8 |
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
We are China Forged Eye Shaft Screw Anchor manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Chain shackle Products
Preformed Guy Grip 7′12 Swg Dead Ends
Drop-out Fuse-Link Assembly 33kv
Popular Forged Eye Shaft Screw Anchor Products
Suspension Clamps (With Clevis)
Popular jgtrade1 Products
12kv 10ka Polymer Housed Gapless Surge Arrester
Two-Way Clamps with Three Bolts
Drop-out Outdoor High Voltage Expulsion Dropout Fuse Cutout 100A Cut out
Popular Oval Eye Nut Products
T-Connectors for Two-Bundle Conductor Type Tys
Hot Sale Galvanization Eye Bolt
Tags: Chain shackle, Forged Eye Shaft Screw Anchor, jgtrade1, Oval Eye Nut