Arrestor, Lighting 15 Kv
Arrestor, Lighting 15 Kv image
Get Latest Price Request a quote
Quick Details
Product Details
The arrester shall be gapless
The allowed housing materials will be a blend of silicone and EPDM rubber, or silicone rubber
The interface between the polymer housing must be filled with a silicone dielectric compound. A housing that is bonded to the internal elements is also permitted.
Each arrester will be supplied with line and ground terminal connectors suitable for clamping conductors from No. 6 AWG solid to No. 2 AWG stranded.
The line and ground terminals ofthe arrester will be 3/8- 16 or M12 threads. All external metal parts (excluding the mounting bracket and associated hardware) will be stainless steel. However, it is permitted that the hex nuts on the line and ground end may be brass.
A ground lead disconnector will be installed on the arrester
Nameplate data shall include the following information: Arrester classification
Manufacturer’s name or trademark
Manufacturer’s product type and identification number
Duty-cycle voltage rating ofthe arrester
MCOV rating ofthe arrester
Month and year ofmanufacture
The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.
Performance Characteristic | |
Applied standard | IEC60282-2 |
Catalog number | |
Nominal system voltage kV | 11 |
Rated Frequency Hz | 50 |
Rated m aximum(design) voltage | 12 |
Rated Continuous current A-RMS | 100 |
Rated Interrupting current asymmetrical/symmetrical A-RMS | 12000/8000 |
BIL 1.2×50 µs kV-peak | 125 |
Minimum critical impulse flashover voltage(CFO)KV peak | 140 |
Dry withstand voltage kV-RMS | 42 |
Wet withstand voltage kV-RMS | 36 |
Creepage distance to group Min.mm | 372 |
Minimum creepage factor of insulator (Creepage Distance/arcing distance) | N/A |
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Electric Fuse
Voltage Fuse
Protection Fuse
Fuse Box
Fast Fuse
We are China Arrestor, Lighting 15 Kv manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Drop out Fuses Products
Polymer Fuse Cutout, Drop out Fuses 21kv 100A
36kv 38kv Expulsion Fuse Element
Polymer Fuse Cutout, Drop out Fuses 18 Kv 100A
Polymer Fuse Cutout, Drop out Fuses 15 Kv 100A
Popular Fuse Cutout Products
33kv Hv-33 Outdoor Expulsion Drop-out Type Distribution Fuse Cutout
30kv Fuse Cutout Approved by Kema Laboratory
Fuse Cutout, Drop out Fuses 33kv 2000A
33kv Drop-out Fuse Cutout Porcelain High Voltage Overhead Line
Popular High Voltage Fuse Products
27kv High Voltage Porcelain Fuse Cutout, Drop out Fuse 24kv 100A/200A
Fuse Links Mv Type J Slotted (400 AMPS)
High Voltage Dropout Fuse (Vc-13) Fuse Cutout, Porcelain Cutout Fuse Cutout, Silicon Cutout
Popular jgtrade1 Products
Fuse Cutout, Drop out Fuses 18kv 200A
Yh10W-36, Sharp Head 36kv 10ka Surge Arrester
145kv Instrument Transformer 50va, 0.2 (for Winding: 1) & 50va, 6p (for Winding: 2)
Pin Type Line Porcelain Insulator
Fuse Cutout, Drop out Fuses 11-22kv
Tags: Drop out Fuses, Fuse Cutout, High Voltage Fuse, jgtrade1