Base Accessory for Compression Retention
Base Accessory for Compression Retention image
Get Latest Price Request a quote
Quick Details
Product Details
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.
Simple clamp 8 "x 1-1 / 2" x 1/4 " | |
Laminated structural steel | |
The galvanization must be carried out once the operations of forging, casting, cutting, drilling, machining, etc., have been completed, as well as the cleaning of said products. The finished pieces must have a quality finish, uniform galvanized surface (without draining) reasonably smooth and without bubbles, excess material and areas without coatings, bubbles, salts, etc. The edges and holes clean of burrs and defects of cutting operation. | |
Each piece of two-way clamps must be marked with the manufacturer’s symbol or identification and the nominal use range, prior to the galvanization process. | |
inch(mm) | 8(203.20) |
inch(mm) | 1 -1/2 (38.1) |
inch(mm) | 1/4 (6.35) |
kg | 1.54 |
Formed by two parts, a front piece with central hole for the car bolt and the previous piece without central hole. | |
Two 1/2 "x 6" machine bolts with their respective square nut and washer | |
kg | 1.54 |
Product | D Bracket | ||||||
Test Items | Test Content | Test Result | |||||
Sample 1 |
Sample 2 |
Sample 3 |
Sample 4 |
Sample 5 |
Remarks | ||
Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
Stoma Trachoma | √ | √ | √ | √ | √ | ||
Fins | √ | √ | √ | √ | √ | ||
Burr | √ | √ | √ | √ | √ | ||
Galvanizing thickness | μm | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion: |
Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
Inspector | Date: 02. March,2011 Approved: |
We are China Base Accessory for Compression Retention manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Base Accessory Products
Popular Bolt and Nuts Products
Hot DIP Galvanized 4 Pole Supporting Crossarm (LV)
Cable Sleeve 95-240 mm² Screw Connection
5/8 "Long Straight Shackle Crillete Recto 5/8
High Strength Ground Rod Coupling Ground 1800mm
Pole Line Hardware for Transmission and Distribution Line
Popular High Voltage Fuse Products
PVC Glovessmooth Finishred 27cm
PVC Gloves Smooth Finish Red 40cm
RW11 100A/200A Composite Slicone Rubber Dropout Fuse/High Voltage Fuse Cutout
33kv 100A High Voltage Drop out Fuse
Popular jgtrade1 Products
Fuse Cutout, Drop out Fuses 18kv 200A
Winding Insulation Measuring Rope
30kv Link Stick Operated Air Break Switch Including Crossarm
Tags: Base Accessory, Bolt and Nuts, High Voltage Fuse, jgtrade1