China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link
China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link image
Get Latest Price Request a quote
Quick Details
Product Details
TABLE OF CONTENTS
ITEM
TITLE PAGE
PART 1 GENERAL
1.01 SCOPE E13 1
1.02 STANDARDS E13 1
1.03 SERVICE CONDITIONS E13 2
1.04 SYSTEM CONDITIONS E13 2
1.05 TESTING E13 2
1.06 SPARES E13 3
1.07 PACKING AND SHIPMENT E13 3
1.08 SUBMITTALS E13 3
PART 2 PRODUCTS
2.01 DESIGN E13 4
A. Standardization of Fuse Links E13 4
B. Rating of Fuse Links E13 4
C. Characteristics of Fuse Links E13 4
2.02 MATERIALS E13 4
A. Current Carrying Parts of Fuse Links E13 4
B. Fuse Link Button E13 5
C. Length of Fuse Links E13 5
D. Pull on Fuse Links E13 5
E. Identification E13 5
TECHNICAL DATA SCHEDULE E13 6
PART 1 GENERAL
1.01 SCOPE
This Specification covers the design, manufacturing, testing, supply, delivery and performance requirements of HV Expulsion Type Fuse Links for use by the Electricity Company of Ghana Limited.
1.02 STANDARDS
The fuse links shall comply with the latest editions of and amendments to, the standards/specifications listed below:
IEC – International Electrotechnical Commission
IEC 60282 – High Voltage Fuses Part 2: Expulsion and similar fuses
ANSI American National Standards Institute
IEEE C37.41 – Design for High Voltage Fuses, Distribution Enclosed Single Pole Air Switches. Fuse Disconnecting Switches and Accessories.
ANSI C37.42 – American National Standard Specifications for Distribution Cutouts and Fuse Links.
NEMA National Electrical Manufacturers Association
NEMA SG2 – High Voltage Fuses
1.03 SERVICE CONDITIONS
As in Specification H0C
1.04 SYSTEM CONDITIONS
As in Specification H0C
1.05 TESTING
Type Tests
A. The Supplier shall confirm on the attached schedule that the following tests have been performed according to ANSI C37.42.
1. Melting Current Tests; Table 6
2. Temperature Rise Tests
3. Time/Current Characteristic Tests
B. Type/Design Tests may (at the Purchaser’s discretion) be dispensed with if the Supplier/Contractor furnishes evidence to the Purchaser’s satisfaction that the relevant tests have already been performed on identical equipment. In this case the Supplier shall provide documentary proof in the form of Certified Test Certificates that the assembled equipment and its component parts been successfully typetested by an independent testing authority in accordance with the relevant clauses of referenced Standards. Test Certificates as evidence of successful completion of type tests shall be submitted as part of the Bid.
C. Inspection
1.06 SPARES
(NOT APPLICABLE)
1.07 PACKING AND SHIPMENT
As in Specification H0C
1.08 SUBMITTALS
As in Specification H0C
2.01 DESIGN
A. Standardization of Fuse Links (Mechanical/Interchangeable).
High voltage expulsion fuses shall be suitable for use on the Expulsion fusegears described in the associated specifications H16 and H34.
B. Rating of Fuse Links
The preferred rating of fuse links shall be 3A, 5A, 8A, 16A, 25A, 40A, 63A and 100A at 11kV and 1A, 2A, 3A, 5A, 8A, 16A, 20A and 31.5A at 33kV. The rated current of the fuse link is the maximum current which it will carry continuously without deterioration and undue heating. Supplier shall state on the attached schedule the maximum temperature in oC attained by the fuse link after continuous operation at maximum rating.
C. Performance Characteristics of Fuse Links
1. The fuse links are required to give protection against short circuits. They shall be so rated and shall have such blowing characteristics as to be suitable for selective operations with the fuse links at present in use on the system namely Type K i.e. fast, fuse links to NEMA SG2 and ANSI C37.42 1981.
2. The Supplier shall present to the Purchaser timecurrent characteristics of all the distribution fuselinks on offer. The performance characteristics of the fuselinks shall include:
(a) Meltingtimecurrent characteristics
(b) Total clearingtimecurrent
The timecurrent characteristics shall be presented as curves.
The Supplier shall state the minimum and maximum melting currents required to melt the fuse links at the three appropriate time points used in Table 6 {meltingcurrents for TypeK (fast) fuse links) of ANSI C37.42 1981
2.02 MATERIALS
A. Current carrying Parts of Fuse Links
All current carrying parts of the fuse links shall be nonferrous material; the main requirements being resistance to atmospheric corrosion. Tin is not acceptable as a possible element.
Supplier shall state composition of:
1. Fuse Element
2. Fuse Link
B. Fuse Link Button
The diameter of the button head cap on fuse links shall be 19.1mm. Removable type button heads are preferred for use with 11kV fusegear.
C. Length of Fuse Links
The minimum overall length of fuse links rated 1 to 100 amperes shall be:
: 510mm for 11kV units per ANSI C.37.42
: 762mm for 33kV units per ANSI C.37.42
D. Pull on Fuse Links (Tensile Withstand Strength)
The expulsion fusegear shall operate satisfactorily while exerting a pull of 44.5N on the fuse link per ANSI C.37.42, 3.2.3.4 1981.
E. Identification
Each fuse link must have stamped on it:
1. Manufacturers name or identifying mark
2. Continuous current rating
3. Type designation, K or T
We are China China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular China Fuse Products
Pd4 (15-27kV) Chinese Mv Fuse Cutout
China Manufacturer Supply High Voltage 33kv 36kv Drop-out Fuse Cutout
China Factory Price Outdoor 33-36kv Porcelain Fuse Cutout
Popular China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link Products
Popular China Transformer Fuse Products
Popular jgtrade1 Products
Fuse Cutout, Drop out Fuses 33kvv 1200A
Substation Surge Arrester Disconnector132kv 66kv 275kv
U-Shaped Conductor Twisted 90 Degrees
24-27kv 200A Silicon Rubber Drop-out Fuse Cutout
Tags: China Fuse, China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link, China Transformer Fuse, jgtrade1