Crimp Plate Type Copper Holding Pole Connector

Product features
Made of pure copper plate stamping, using the principle of slotted slot design, the clip is installed on the conductive rod, tighten the bolts on both sides of the slot, the clip clamps the screw, has a large electrical contact area, superior conductivity, low resistance, and low temperature rise It has the advantages of resistance to electrochemical corrosion, and the other side is connected to the wire;
Structural characteristics
Executive Standard
Meet the technical requirements of GB/T 2314.
Raw materials
Made of pure copper, dense material and high conductivity;
Connection method
The screw sleeve is screwed into the locking connection through the screw, and the incoming and outgoing line uses the screw to press the wire through the cover plate.
use
It is suitable for the connection of the inlet and outlet of the conductive column of the transformer and other equipment.
>>——————————————————————

>>——————————————————————