Dead End Hook 430/Pigtail Hook
Dead End Hook 430/Pigtail Hook image
Get Latest Price Request a quote
Quick Details
Product Details
Hook threaded nominal diameter (A) 16mm
Minor threaded diameter (W) 14
Thickness of nut (M), washer diameter and thickness as per BS standard
Yield strength of pin must be 240N/mm2
LV Hook from corrosion it shall be hot dip-galvanized
Visual inspection
Size inspection
Galvanizing test
Strength test
Suspension hook M16-380
Hook threaded nominal diameter (A) 16mm
Minor threaded diameter (W) 14
Thickness of nut (M), washer diameter and thickness as per BS standard
Yield strength of pin must be 240N/mm2
To protect LV Hook from corrosion it shall be hot dip-galvanized
Testing
Visual inspection
Size inspection
Galvanizing test
Strength test
The following testing shall be carried out
Dead End Clamp ,Anchoring Clamp
The clamps should be designed to Anchor LV AB cable with insulated messenger. The clamp
should anchor/hold the neutral messenger without damaging the insulation.
The clamp should conform to the standard NFC 33041 and 33042 or equivalent. The clamp
body should be made of corrosion resistant Aluminium alloy, bail should be of stainless steel
and self adjusting wedges should be weather and UV resistant polymer.
Anchoring assemblies are used to firmly attach the messenger of ABC to a support and
transmit the mechanical tension at the end of a run or to the supporting structures at a major
change in direction.
The suspension clamp shall be manufactured from weather and UV light resistant reinforced
nylon and aluminum alloy. The clamp should provide an additional insulation between the
cable and the pole.
Clamps should be fixed with pole by eyehook/bracket. Breaking load should not be less than
15kN
Suspension Assembly is used for supporting an ABC by installation on the messenger at an
intermediate point of support such as a pole. It can accommodate small angles of deviation up
to 30o. The clamp should hold insulated messenger of diameter range from 6mm up to 12 mm.
Visual examination
Dimensional and material verification
Tensile strength
Dielectric voltage test
Climatic & corrosion ageing
Endurance test under mechanical and thermal stresses
Electrical ageing
TYPE:APG-C4
NAME:Parallel groove clamp APG-C4
Specification
Material |
||
Material standard |
||
Range of conductor cross-section |
16…50/2.5…35 |
|
Range of conductor diameter, Al/Cu |
mm2 |
|
Tensile strength |
KN | 5 |
Thickness of zinc coating, |
mm |
43 |
Test voltage at 50Hz for one minute in water |
kV |
6 |
Al 35-300mm² Size 105*65mm Tri-bolts Bolt M10*60 Weight 560g
We are China Dead End Hook 430/Pigtail Hook manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Anchoring Clamp Products
Strain Dead End Clamp Accessories for ABC / ADSS Cable
Hot-DIP Galvanized Stainless Steel Anchoring Clamp for Two Core Cable Sm157
Universal Suspension Clamp Wiring Suspension Clamp
Smico Best Products for Import Nes-B2 Electrical Wire Tension Connector
Four Core Adjustable Plastic Four Core Dead End Clamps
Popular Dead End Products
Aluminum Tension Clamp, Aluminum Line Clamps High Tensile Strength
Hot Selling 1 / 4 " Preformed Guy Dead Grip Ends
Hardware Fitting 50m Span High Quality Tension Clamp Dear End Grip Thimble
Popular jgtrade1 Products
Fuse Links Mv Type J Slotted (400 AMPS)
Imprint Nitrile Glovespolyester/Nyloncolorful 7-11
10kv Insulation Piercing Connector
Single Flexible Bus-Bar Supports Type Mdg
22kv Porcelain Pin-Type Insulator
Miniature Circuit Breaker MCB MCCB
Popular Pigtail Hook Products
Suspension (Pigtail) Hook Full Thread M12X55
Suspension Pigtail Hook Machine Bolt Pole Bolt Dead End Hook Full Thread M16 M20 Pig-Tail
Power Fitting Hot DIP Forged Steel Ball End Hook Pigtail Bolt
Suspension (Pigtail) Hook Through The Pole M16X240
Big Ball End Hook for Pole Line Fitting
70kn Galvanized Forged Steel Ball End Hooks
Tags: Anchoring Clamp, Dead End, jgtrade1, Pigtail Hook