Export Type Fittings
Export Type Fittings image
Get Latest Price Request a quote
Quick Details
Product Details
Product | D Bracket | ||||||
Test Items | Test Content | Test Result | |||||
Sample 1 |
Sample 2 |
Sample 3 |
Sample 4 |
Sample 5 |
Remarks | ||
Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
Stoma Trachoma | √ | √ | √ | √ | √ | ||
Fins | √ | √ | √ | √ | √ | ||
Burr | √ | √ | √ | √ | √ | ||
Galvanizing thickness | μm | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion: |
Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
Inspector | Date: 02. March,2011 Approved: |
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Material grade 300w steel to SANS 143
Finish: hot dip galvanized
With cut threads(cut before galvanizing)
Supplied complete with on Hex nut and one round flat washer
Thread pitch. 2.0(before galvanizing)
Washer outside diameter: 29.2-30.0mm bolt Hole 18.0-18 5mm, thickness:2.4-3.6mm
Materials Speciification:SANS 1431
Corrossion Specification:ISO1461
DIMENSIONS | |
A | 74.32mm-78.68mm |
B | 36.00mm-38.00mm |
C | 250mm |
D | 19.16mm-20.84mm |
E | 150mm |
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Standard Bolt
Fastener Nut Bolt
Bolt Screw
Hardware Nut
Stainless Bolt
We are China Export Type Fittings manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Bolt Products
Pole Line Hardware Fitting Forged Thimble Anchor Rod Pigtail Metal Clamp Eye Bolt
Bolt for Porcelain Insulator/Ceramic Insulator
3/8 Inch Galvanized Round Head Carriage Bolt
Strain Clamps for Insulated Cable
Popular Bolts and Nuts Products
Strain Clamps for Hraas Conductor Hydraulic Compressiontype
Thimbles and M16X40mm Bolt &Nut
Popular jgtrade1 Products
Splice Full Traction ACSR-AAAC No. 1/0 to 1/0 AWG
Polymeric Expulsion Fuses 21kv 200A
Fuse Cutout, Drop out Fuses 27kv 100A
Popular Screw Products
Galvanzied Wood Screw Hook for Pole Line Hardware
Strain Clamps for Hraas Conductor Hydraulic Compressiontype
Tags: Bolt, Bolts and Nuts, jgtrade1, Screw