Guy Clamp
Guy Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
6 | Finish | It should present a smooth surface , free of imperfections and defects |
|
7 | Welding | By friction | |
8 | Rules | ANCI C119.4, IEEE 48-1996 | |
9 | Quality certificate | ISO 9001 | |
10 | Identification mark | The name of the manufacturer and the range of application must be engraved on the terminal | |
11 | Permissible driver 2 AWG | AWG | ACSR, AAC, AAAC, CU |
12 | Nominal size of the driver | AWG | # 1/0 |
13 | Driver’s diameter what applies |
mm | 9.14 |
14 | Holes | u | 2 |
15 | Identification color | pink | |
Dimension | |||
16 | Diameter of the hole | inch(mm) | 9/16 (14.22) |
17 | Distance between holes | inch(mm) | 1-3 / 4 (44.45) |
18 | Approximate Length (L) | inch(mm) | 4.2 (106) |
19 | Approximate width (W) | inch(mm) | 4/5 (20) |
20 | Approximate thickness | inch(mm) | 0.18 (4.57) |
21 | Packaging | It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin |
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
We are China Guy Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Chain shackle Products
Popular Guy Clamp Products
Cgu Overhead Galvanized Aluminium Alloy Strain Pole Clamp Suspension Clamp
Ball Clevis, Ball Eye, U Type Ball Eye
Nll Aluminum Strain Clamp (Bolt Type) Nll-3
Hot-dip Galvanized Three Bolts Parallel Suspension Guy Cable Clamp
Guy Clamp for Stay Wire Stay Wire Clamp Clip Wire Rope Jk-1 Jk-2
Popular jgtrade1 Products
7 Gauge Knitted Gloves with PVC Dotscotton/Polyesterunbleached/Bleached White7-11
Hy5ws-12.7/50 Zinc-Oxide Arrester
33-1000kv Substation Equipment
Chave Fusivel Porcelana Link Break
Popular Oval Eye Nut Products
Single Phase Pre-Payment Split Energymeter - RF Communication
Tags: Chain shackle, Guy Clamp, jgtrade1, Oval Eye Nut