High Quality 450/750V Cable Copper Conductor PVC Control Cable (KVVP)

Inner core material: 99.99% oxygen free copper

Executive standard: GB/T9330.2-2008 plastic insulated control cable

Conditions of use: Fixed installation for AC voltage 450/750V and below the power device. Long term working temperature 70%.

Product identification: Identification of the core wire mark shall be in accordance with the provisions of GB 6995.5:
Cable: Red, light blue or numbers 0, 1 recognition;
Three core cable: Red, yellow, green or numbers 1, 2, 3 recognition;
4 core cable: Red, yellow, green, blue, or digital 1, 2, 3, 4 recognition;
Five core cable: Red, yellow, green, blue, black, or digital 1, 2, 3, 4, 5 recognition; T
He main core with red, yellow, green or numbers 1, 2, 3 said, neutral core with light blue or digital 0.
The Yellow / green wire core is used for grounding wire and can not be used for other wire core…Cable sheath is usually black, the manufacturer name, logo should be continuous cable type and rated voltage.
Logo printing should be wear resistant and can not be off, the surface should be legible printing content. * Note: The surface of the sheath logo can also be based on user habits or manufacturers to add other identification content.

Delivery length: Delivery length of cable manufacturing length of not less than 100 meters, the allowable length of not less than 20 meters in length of cable delivery, the number is not more than delivery 10% of the total length. According to the agreement between the two parties, allowing delivery to any length of cable.

Packaging, transportation and storage
1. Roll or disc cable shall be wound and properly packed…The cable end should be sealed, the cable ends extend out of the outer protective cover should be added, length of less than 300mm.
2, cable packaging should be accompanied by the label: Manufacturer name, model, specification, rated voltage, length, production date, standard number and so on.
3, the transport is generally based on the form of vehicles and ships, transport must cable firmly fixed, in order to avoid collision or tipping of the cable or the disc with damage. Cable tray not flat. It is forbidden to throw cable trays from high places from high places…
4, the finished cable should be kept between the temperature of 0 to 40 DEG C, environment humidity below 85%, do not be direct exposure to the sun, the rain, should be adequate ventilation, to keep the environment dry.

Ordering
In order to correct the cable type, size, length, delivery date, packing method and so on,
For example, the model: ZR-KVV-0.45/0.75kV
Specification:

Length: 10000m
Packaging: Iron disc packaging
Delivery date: XX XX

Installation instructions
During installation, the environmental temperature should be should not be lower than 0° C, if the thermometer test environment temperature below 0° C, should first preheat treatment on the cable and then prepare the installation; Should strictly control the bending radius of cable laying process, so as to avoid the cable inner mechanical damage.

Two, model name:
Insulating rated voltage 0.45/0.75kV solid copper conductor PVC Black PVC sheathed conductor long-term allowed working temperature to 70° C flame retardant control cable technology conform to GB / t19666-2005 specification and GB/T9330-2008 requirements