Holding Chain for Clamp
Holding Chain for Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
U Clamp
PART 1 GENERAL
1.01 SCOPE
This Specification covers the design, manufacturing, testing supply, delivery and performance requirements of D Bracket for use on overhead networks.
1.02 STANDARDS
The fittings comply with the latest editions of, and amendments to, the standards listed below:
BS – British Standards Institution
BS 3288 – Insulator and Conductor Fittings for Overhead Power Lines
BS EN ISO 1461 – Hot Dip Galvanized Coatings on Iron and Steel Articles
VDE – Verband Deutscher Elecktrotechniker
VDE 0202 – Requirements for aluminum for Electrical Technology
DIN – Deutsche Industrie Normen
DIN 6796 – Conic spring Washers
1.03 SERVICE CONDITIONS
Suitable for outdoor use in the Tropical zone,with a maximum ambient temperature of approximately 30degrees centigrade with heavy rainfall and high humidity of approximately 100% .
1.04 SYSTEM CONDITIONS
Comply the Customer requirment.
1.05 TESTING
A. Routine Tests
1. Routine tests carried out on all units of a particular type.
2. Mechanical routine testing will be carried out in accordance with BS 3288; Part 1.
3. The results of these tests will be recorded on a Routine Test Certificate.
4. Routine Test Certificates will include, in addition to the test results, the Purchaser’s Order Number.
B. Type Tests
1. Type tests will be carried out on individual units of a particular type.
2. Type tests will be in accordance with BS 3288: Part 1.
C. Sample Tests
1. Method of sampling and testing and test parameters shall be in accordance with BS 3288: Part 1.
2. Test results shall be recorded in the same manner as routine tests.
D. Inspection
The Purchaser reserves the right to witness the manufacturing process, any type tests specifically performed on the insulators to be supplied to ECG and any routine tests required in the manufacture and supply of the insulators and fittings. The Supplier shall provide free access to the Purchaser to any site where such manufacturing process, or tests, either type or routine tests are taking place. The Supplier shall bear the in plant costs of such inspection. The Supplier shall provide the Purchaser of a schedule of manufacture and tests at least two weeks before the events are to occur.
1.06 SPARES
(Not Applicable)
1.07 PACKING AND SHIPMENT
Export Standard
1.08 SUBMITTAL
As specified Of Customer
PART 2 PRODUCTS
2.01 DESIGN
According to the Drawing Attach
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Electric Power Equipment
Power Line
Electric Power Supply
Electrical Hardware
Electric Power Cable
We are China Holding Chain for Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
Overhead AAC/AAAC/ACSR/Acar Bare Conductor Electrical Cable
AAC (All Aluminium Conductors) Bare Conductor Low Voltage Bare Conductor
Copper-Aluminum / Aluminum Parallel Groove Clamp for Electric Power Accessories
Aluminum Bare Conductor AAC Wasp
Aluminium Conductor Steel Reinforced ACSR Hare Conductor
Aluminium Conductor Steel Core Bare Conductor ACSR
Popular jgtrade1 Products
Switch Disconnector Fuse Holder, 36 Kv - 100 AMP, Without Arc Chute
Type for Ground Rod to Earthwire
Tubular Bus-Bar Flexible Fittings Type Mgsd
Low Voltage 415V/500V Slotted Wedge HRC High Breaking Capacity Fuse BS88 82mm Jpu
Hy2.5wd-12.7/31 Zinc-Oxide Arrester7
Copper-Aluminum / Aluminum Parallel Groove Clamp for Electric Power Accessories
Popular Pole Line Hardware Products
Galvanized Transformer Lead Pin for Electric Power Fitting
Forged/Casting Pole Line Hardware for Insulator (70KN-420KN)
T-Connectors for Tubular Bus-Bar Type Mgtl
Hot DIP Galvanized Steel Thimble Clevis for Dead End
Popular Tension Clamp Products
Forged Steel Strain Clamps Nld-2
Anchor Clamp with Plastic Washer/ Wedge Clamp
Aluminium Alloy Strain Clamp Nll-6D
ABS Plastic Material Fish Type FTTH Fiber Drop Cable Tension Clamp Wire Retainer
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp