Hot-DIP Galvanized J Hook Suspension Clamp

Description:
The J hook suspension clamp are made of carbon steel with hot dipped zinc surface treatment which can last very long period without rusty for pole accessories. It can be used with other series stainless steel band and buckles to fix on the pole to hold the cables. Different cable sizes are available. Please kindly contact us for more details.

Application:
The J hook suspension clamp is used to link signs and cable installation on the post, hot dipped galvanized and can be used outside for more than 10 years without any rusty. There will no sharp edges, and corners rounded. All items will be clean rust free, smooth and uniform throughout and will  also be free from burrs.Hook clamps are designed to provide a suspension for 10 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100m).

Specification:
1.Two sizes to cover the full range of ADSS cables from 10 to 20mm.
2.Installation in just a few seconds with a 13 mm standard 6-point spanner.
3.The shape of the J Hook allows a running out of the cable directly in the hook
4.The suspension clamps can be directly secured to the poles using bolts or bandings. They can also be installed on hook bolts to provide some flexible suspension point and give extra protection to the cable against wind induced vibrations.

>>——————————————————————
 

>>——————————————————————