Hv Metal Oxide Porcelain Lighting Arrester with Garding Ring
Hv Metal Oxide Porcelain Lighting Arrester with Garding Ring image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
| Type: |
Y5W5-108/259 |
||
| Rated voltage———kV | 108 | 4/10µS High current impulse kA | 100 |
| MCOV —————-kV | 86 | Lightning impulse withstand kV | 550 |
| Nominal Current——-kA | 5 | Power frequency voltage withstand(dry/wet)kV | 230 |
| Residual voltage of steep impulse—-at 5kA(kV) | 339 | 0.1S TOV————–kV | 129.6 |
| 8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 281 | 1S TOV—————-kV | 124.2 |
| Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 220 | 10S TOV—————kV | 118.8 |
| 1mA D.C reference voltage (kV) | 157 | 1200S TOV————-kV | 108 |
| Line discharge level | 2 | Creepage distance —-mm | 3906 |
| 2mS long duration impulse current A | 600 | Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
| Environment temperature: -40–+40 degree | |||||||
| altitude:<1000m | |||||||
| 48HZ<Rated frequency<62HZ | |||||||
| Power frequency voltage should not be more than continuous running voltage | |||||||
| Max wind speed should be less than 35m/s | |||||||
| Earthquake intensity should be less than 7 degree | |||||||
| If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China Hv Metal Oxide Porcelain Lighting Arrester with Garding Ring manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Nominal System Voltage 110kv Line Composite Polymeric ZnO Arresters
Lightning Arrestors/Arrester Surge Protector Surge Arrester
Surge Arrester With External Gap 180-240kv
9kv 24kv Composite Silicon Rubber ZnO Lightning Arrester 11kv
51kv Ploymer Housed Moa Surge Arrester With Disconnect
Electric Appliance Components ZnO Varisotr Block
Popular Lightning Arrester Products
Polymer Fuse Cutout, Drop out Fuses 18kv 200A
12kv Polymeric Housed Metal Oxide Lightning Arrester
Polymer Fuse Cutout, Drop out Fuses 30 Kv 100A
15ka Nominal Discharge Current Lightening Arrester with Polymeric Housed
12kv -36 Kv Polymer Housed Gapless Surge Arrester
Yh10W-12, Sharp Head 12kv 10ka Surge Arrester
Popular Surge Arrester Products
10ka Polymer Housed Lightning Arrester Surgearrester
Polymer Lightning Arrester with External Gap 42kv-75kv
20kv Porcelain Fuse Cutout Insulator
Xirui 24V 33kv 10ka Polymer Distribution Metal-Oxide Lightning Surge Arrester
36kv Polymeric Housed Zinc Oxide Lightning Surge Arresters Series Yh10W-30
204kv 220kv Polymeric Housing Surge Arrester for Overvoltage Protection
Popular Surge Arresters Products
Outdoor Station Type 11kv-220kv Polymeric Lightning Arrester (type test)
Electrical Product 30kv Surge Protective Device
Kema Tested Electrical Equipments Rated Voltage 102kv Polymeric Surge Diverters
0.25~500kv 10ka Hv Polymeric Zinc Oxide Surge Arrestor with Kema
Fuyang Metal Oxide Polymer Surge Arrester with Bracket
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters
