Low Voltage Electric Ipc Insulation Clamp ABC Accessories Piercing Tap Connector for ABC Cable Branch

Install with mains power outage.

describe
Waterproof insulation piercing connectors are suitable for most types of LV ABC conductors and connections to service and lighting cable cores. When the bolt is tightened, the teeth of the contact plate penetrate the insulation and establish a perfect contact. Tighten the bolt until the head shears off. Guaranteed tightening torque (fuse nut). Avoid peeling off insulation.
Operating Conditions: <6KV,>1kV, 50/60Hz, -50°C to 85°C
Standards: IEC 61284, EN 50483, IRAM2435, NFC33 020.

Material
Body: PA 66
Connection bridges: tinned copper, tinned brass, aluminum
Seal: Flexible PVC
End Cap: Flexible PVC
Grease: Silicone grease
Bolts: Hot-dip galvanized steel, grade 8.8
Washers, Nuts: Zinc-plated steel
Fuse Nut: Zinc Alloy

feature
• Watertightness tested underwater at 6 kV for 30 minutes
• Potential free tightening bolts allow safe installations on life lines
• Bi-metal, suitable for aluminium and copper conductors
• Long neck 10 mm shear nut for reliable installation
• Components not isolated, end caps attached to body
• Insulation material made from weather-resistant and UV-resistant glass fiber reinforced polymer
 

Model JMA3-120
Main line 16-120(mm2)
Branch line 16-120(mm2)
Bolt 1
Torque (Nm) 18NM ±2

Why Choose Ziyong Technology

1. Professional operation experience.
2. Free sample are available.
3. All size can be customised.
4. Safe packaging.
5. Prompt delivery.

The reasons of choosing insulation piecring connector
 
1. Simple installation
2. Safe use
3. Economical Cost
4.High applicability









FAQ: 
1. Q: Do you have a catalog? Can you send me the catalog to have a check of all your products? 
A: Yes, We have product catalog. Please contact us, we’ll send our catalog by E-mail. 

2 Q: I can’t find the product on your catalog, can you make this product for me? 
A: Our catalog shows most of our products but not all. If you couldn’t find it, let us know the specification of your requirements, it usually takes 20-30 days for us to design and make new moulds which match your requirements.  

3 Q: What’s your payment term? 
A: The price FOB Ningbo under payment term is 50% T/T in advance and the balance before shipment.  

Service
Choose our products! You’ll get
1) Good quality guarantee (2 years)
2) Factory direct prices
3) On time delivery
4) Free sample
5) Professional technology support

Strict quality controls have been taken to ensure that you’ll get reliable products.
a. Material checks before production.
b. Random inspection during production.
c. Inspection before the shipment.

Our products fully comply with well recognized standards such as IEC, BS, ANSI.