Lug, Alum. 1/0 AWG. Poppy

Lug, Alum. 1/0 AWG. Poppy image

Get Latest Price Request a quote

Quick Details

Product Name:

Lug, Alum. 1/0 AWG. Poppy

Standard:

IEC IEEE

Fusing Device:

Fuse Link

Fusing Speed:

T K

Shape:

Circle

Usage:

High Voltage

Type:

Distribution

Breaking Capacity:

High

12:

36:

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC282-2 IEEEc37-41

Origin:

China Nanyang

HS Code:

85351000

Product Details

CUT-OUT

Must be used on both aluminum and copper conductors.
   Connectors must be clearly marked with wire size, die index, color code, and crimp location bands
   Must pre-filled with oxide inhibitor
   Must have color coded end caps are factory inserted in the barrels to match the die
color code and prevent foreign materials from entering the barrel.
   Must accommodate conductor types:
o Aluminum Code Wire: Class B (Concentric, Compressed, Compact)
o Copper Code Wire: Class B (Concentric, Compressed, Compact or Class C
o Copper Clad Aluminum: Noted in the conductor accommodates as CCA

Gama 20 kV a 36 kV

– Circuito Principal 200 A

– Ith 8 kA.

– Montaje Vertical

– Tubo Fusible de 100 A

– Tubo Fusible compatible con los

estándar norteamericanos.

– Este modelo permite el montaje

de la Autoválvula directamente

sobre la escuadra de fijación.

– Eslabones fusible:

de 2 Amp. a 100 Amp.

– Porcelana de color gris, efecto

Antivandálico.

— Montaje sencillo gracias a sus

tornillos de fijación anti-giro.

– No es necesaria ninguna

herramienta para cambiar el

eslabón

La base cortacircuitos en "V" monta aisladores de columna con

armaduras metálicas externas y línea de fuga en función de los niveles

de contaminación I-III-IV asignados.

Su diseño permite el accionamiento por pértiga desde una posición mas

cómoda para la maniobra, al conseguir un ángulo de 45º con respecto a

la base de sujección.

Incorpora un tubo fusible con capacidad para eslabones de hasta 100A

, y es totalmente intercambiable con los modelos de una columna y

modelos de otros fabricantes.

El interior del tubo portafusible está constituido por un recubrimiento

vegetal lo que le confiere un poder de extinción superior a otros

modelos (según fabricante).

El Seccionalizador en "V" monta aisladores de columna con

armaduras metálicas externas y línea de fuga en función de los niveles

de contaminación I-III-IV asignados.

Su diseño permite el accionamiento por pértiga desde una posición mas

cómoda para la maniobra, al conseguir un ángulo de 45º con respecto a

la base de sujección.

Gama:

15 , 24 y 36 kV

12 – 25 – 40 – 63 -100 – 140 A

Número de Defectos: 1 , 2 (Estándar) , 3.

Tiempo de Regeneración : Min. 30s.

Principales Características :

Dispositivo Autoalimentado. Utilización conjunta con Interruptores automáticos.

Importante reducción en los costes derivados de mano de obra y sustitución de fusible de los Cut-Out

convencionales derivados de fallos transitorios, ocasionados por tormentas eléctricas , accidentes

vegetales , etc…

Ausencia de Arcos y desgaste en los contactos.

Reutilización del equipo tras su rearme manual y acoplamiento en su base.

TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless

steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
DROP OUT FUSES

11Kv

N/O	DETAIL			DATA
1	Description			11kV Fuse link assembly complete with fuse carrier rated at 100A and mounting bracket to PIESA 002. (See Figure 1 to Figure 12 below)
2	System conditions of service a) nominal Voltage (Un) r.m.s		kV	11
	b) maximum system voltage (Um) r.m.s		KV	12
	c) earthing			Effective & non effective
	d) Frequency		Hz	50
3	Site conditions of service a) altitude		m	1400
	b) Operating Ambient temperature		°C	–1 to 40
	c) Humidity		%	85
4	Rating
	a) Nominal voltage		kV	11
	b) Rated current	Fuse carrier	A	100
		Cut out base	A	200
5	Electrical components
	a) Insulator material specification			Porcelain
	Dielectric strength
	Lightning impulse withstand (1.2/50)		kV	95
	Power frequency wet withstand voltage r.m.s		kV	28
6	Specific creepage distance		mm/kV	25
7	General information to be provided with bid:

	Drawings and brochures showing outline and general arrangement	Yes/No	Yes
	b) Detailed drawings of all items showing critical tolerances to be provided with bid	Yes/No	Yes
8	Previous Type test report/certificate on complete fuse link assembly to be provided with bid	Yes/No	Yes
10	Routine tests (acceptance tests on sample Product) to be provided on delivery	Yes/No	Yes
11	Applicable standard		PIESA 002
12	Other applicable standards		NRS 035 SABS IEC 60282–2 SABS IEC 60186 BS 137 part 2

3. FURTHER REQUIREMENTS:

3.1 There shall be no rivets in the parts that form the current path
3.2 Water shall not be able to accumulate on any part of the equipment nor shall any feature introduce moisture into any component.
3.3 The design shall incorporate all reasonable precautions and provisions for the safety of personnel concerned with the operation and maintenance of the same.
3.4 The current path shall be such that load current shall only flow through high conductive materials such as copper and its alloys. Load current shall not be permitted to flow through ferrous components, springs, or spring–loaded mechanisms.
3.5 All load current paths shall be so designed that the relevant parts of the solid link assembly are capable of carrying the specified rated current without exceeding the permitted temperature rise in SABS IEC 60282–2
3.6 Contacts shall be based on the line contact principle and there shall be no welds on the contact parts. The construction of the Drop out fuse base and the solid link shall ensure their mutual alignment during closure.
3.7 The solid link should have an eye and an operating tongue.

4. MARKING AND IDENTIFICATION

4.1 Markings to conform to SABS IEC 60282–2
4.2 In addition , the following markings must be included : ZESCO Indent No.

3.0 SUPPLIMENTARY NOTES

3.3 Suppliers should give sufficient information including drawings (which must be brief, clear and to the point) on how their drop out fuse designs addresses these requirements. Further, Suppliers may offer better alternatives that are of cost benefits to. It is therefore imperative that schedule "B" is completed by the tenderer. Any deviations/modifications/alternatives specification must be listed in schedule "C." No deviations/modifications/alternatives will be recognised unless they are listed in schedule "C"
3.4 The drawings to be submitted by the tenderer must include the following:

3.4.1 Critical tolerances
3.4.2 Show details of the insulator, the fuse carrier, the solid–link, the upper contact, the lower contact, the cutout base and the bracket for fixing to either wooden or steel cross arm.

3.5 The type tests to be submitted must be those issued by internationally recognised testing authority.
3.6 All salient design details of each item required shall be supplied with the tender.
33kV

N/ O	DETAIL			DATA
1	Description			33 kV Fuse link assembly complete with fuse carrier rated at 100A and mounting bracket to PIESA 002. (See Figure 1 to Figure 12 below)
2	System conditions of service a) nominal Voltage (Un) r.m.s		kV	33
	b) maximum system voltage (Um) r.m.s		KV	36
	c) earthing			Effective & non effective
	d) Frequency		Hz	50
3	Site conditions of service a) altitude		m	1400
	b) Operating Ambient temperature		°C	–1 to 40
	c) Humidity		%	85
4	Rating
	a) Nominal voltage		kV	33
	b) Rated current	Fuse carrier	A	100
		Cut out base	A	200
5	Electrical components
	a) Insulator material specification			Porcelain
	Dielectric strength
	Lightning impulse withstand (1.2/50)		kV	170
	Power frequency wet withstand voltage r.m.s		kV	70
6	Specific creepage distance		mm/kV	25

7	General information to be provided with bid: Drawings and brochures showing outline and general arrangement	Yes/No	Yes
	b) Detailed drawings of all items showing critical tolerances to be provided with bid	Yes/No	Yes
8	Previous Type test report/certificate on complete fuse link assembly to be provided with bid	Yes/No	Yes
10	Routine tests (acceptance tests on sample Product) to be provided on delivery	Yes/No	Yes
11	Applicable standard		PIESA 002
12	Other applicable standards		NRS 035 SABS IEC 60282–2 SABS IEC 60186 BS 137 part 2

5. FURTHER REQUIREMENTS:

5.1 There shall be no rivets in the parts that form the current path
5.2 Water shall not be able to accumulate on any part of the equipment nor shall any feature introduce moisture into any component.
5.3 The design shall incorporate all reasonable precautions and provisions for the safety of personnel concerned with the operation and maintenance of the
same.
5.4 The current path shall be such that load current shall only flow through high conductive materials such as copper and its alloys. Load current shall not be permitted to flow through ferrous components, springs, or spring–loaded mechanisms.
5.5 All load current paths shall be so designed that the relevant parts of the solid link assembly are capable of carrying the specified rated current without exceeding the permitted temperature rise in SABS IEC 60282–2
5.6 Contacts shall be based on the line contact principle and there shall be no welds on the contact parts. The construction of the Drop out fuse base and the solid link shall ensure their mutual alignment during closure.
5.7 The solid link should have an eye and an operating tongue.

6. MARKING AND IDENTIFICATION

6.1 Markings to conform to SABS IEC 60282–2

3.0 SUPPLIMENTARY NOTES

3.5 Suppliers should give sufficient information including drawings (which must
be brief, clear and to the point) on how their drop out fuse designs addresses these requirements. Further, Suppliers may offer better alternatives that are of cost benefits
3.6 The drawings to be submitted by the tenderer must include the following:

3.6.1 Critical tolerances
3.6.2 Show details of the insulator, the fuse carrier, the solid–link, the
upper contact, the lower contact, the cutout base and the bracket for fixing to either wooden or steel cross arm.

3.7 The type tests to be submitted must be those issued by internationally recognised testing authority.