Nxl 35-240mm² 14.5-36.4kn Wedge Insulation Self-Locking Tension Clamp

Nxl 35-240mm² 14.5-36.4kn Wedge Insulation Self-Locking Tension Clamp image

Get Latest Price Request a quote

Basic Info.

Model NO.

NXL

Usage

Electrical Appliance

Material

Aluminum Alloy

Type

Wedge-Shaped

Defense

Durable and Practical

Transport Package

Material Flow

Specification

35-240mm² 14.5-36.4KN

Trademark

CNKC

Origin

China

Production Capacity

5000pieces/Year

Packaging & Delivery

Package Size

50.00cm * 40.00cm * 30.00cm

Package Gross Weight

5.000kg

Product Description

NXL wedge-type insulated tension clamp is suitable for distribution lines of 10KV and below. It fixes the overhead insulated aluminum wire or bare aluminum wire on the insulator of the corner or terminal tension rod, so as to fix or tighten the overhead wire. Insulation cover It is used together with the tension clamp for insulation protection.

Model Description

Technical parameters and Installation effect

Product features and Installation matters

Installation matters:
1. Before installation, please check whether the logo on the side of the wedge core is matched with the wire to be installed;
2. After confirming that it is correct, connect the hanging plate with the connecting hardware, connect the connecting hardware with the insulator, and the opening of the body should be as low as possible;
3. Use the wire tensioner to take up the wire to a suitable position, put the insulated wire into the inner cavity of the body, and then put it into the insulating wedge-shaped core, while the two wedge-shaped cores are kept flush ;
4. Tap the end of the wedge-shaped core for pre-tightening. When tapping, do not tap the side of the wedge-shaped core and the insulation layer of the wire, and the two wedge cores should be flush with each other after tapping, then remove the wire tensioner and adjust the nut to meet the engineering requirements;
5. To ensure that the tension clamp does not pull the wire after tightening the wire, it is recommended to reserve at least 1 meter of wire length on the jumper side of the tail end of the wedge-shaped core.
1. The shell is cast with anti-oxidation high-strength aluminum alloy.

Features:

2. The wedge core is made of insulating reinforced plastic, the positive frequency withstand voltage is ≥18kV, and the voltage is maintained for 1 minute without breakdown.
3. There is no need to strip off the insulating layer, and it is common to the insulated aluminum core wire.
4. No power loss, the most energy-saving certified product.
5. Wedge-shaped structure, easy and reliable installation.

Product details

Products real shot

A corner of the production workshop

Product packaging

Product application case

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China Nxl 35-240mm² 14.5-36.4kn Wedge Insulation Self-Locking Tension Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote