Pad Mounted Compact Type Three Phase Distribution Transformer
Pad Mounted Compact Type Three Phase Distribution Transformer image
Get Latest Price Request a quote
Quick Details
Product Details
Compact Type is a three-phase pad-mounted transformer housed in a minimum profile enclosure. It is designed for applications requiring three-phase service in a small, unobtrusive package and is the ideal choice for small commercial loads. The design is easier to handle, install and maintain. Its removable flip-up hood allows easy access to the terminal compartment.
Click to enlarge
Ratings
• KVA Ratings (65° Rise, ONAN) 30, 45, 75, 112.5, 150 |
• High-Voltage Ratings (Delta or Wye) 2400 through 34500 (through 150 kV BIL) |
• Low-Voltage Ratings (Delta or Wye) 120 through 480 (through 30 kV BIL) |
Standard Features
• Meets or exceeds applicable IEEE, NEMA, and DOE standards (except for certain
dimensional characteristics)
• Full compliance with ANSI C57.12.28 enclosure integrity standards
• Externally clamped universal high-voltage bushing wells for
dead front applications (three for radial feed operation
or six for loop feed operation)
• Externally clamped low-voltage bushings with threaded stud for full-load
current through 1400 Amps, or externally clamped one-piece
NEMA spade bushings for full-load current above 1400 Amps
• Front panel accessory mounting brackets
• Removable neutral ground strap in low-voltage compartment
(for wye connected low-voltage ratings only)
• Lifting provisions
• Removable hood with stainless steel hinge pins and barrels
• Removable sill with stainless steel fasteners
• Recessed hood latching system with captive pentahead security bolt,
floating nut and interlocking padlock provision
• Tank ground provisions
• Mild steel tank and terminal compartment
• Insulated high-voltage/low-voltage compartment barrier
• Domed top surfaces on tank and terminal compartment to prevent water retention
• Recessed tank compartment bottom
• Electrostatically applied powder paint finish with olive-green
polyurethane top coat (Munsell 7GY 3.29/1.5) provides
excellent resistance to chipping, fading, abrasion, and corrosion
• Oil fill/oil level plug
• Automatic pressure relief device mounted in terminal compartment
• Electrical grade mineral oil insulation fluid with oxidation inhibitor
• Laser engraved anodized aluminum nameplate
• Decal bushing designations
Optional Features
• Loadbreak high-voltage bushing inserts or externally clamped integral
(one piece) high-voltage bushings
• Low-voltage connectors, including various screw-on or slip-on types
• Externally operable non-loadbreak high-voltage tap switch with one
of the following tap ranges: four 2.5% taps above normal;
or four 2.5% taps below normal;
or two 2.5% taps above and two 2.5% taps below normal;
or taps at 13800/13200/12870/ 12540 for transformers with a nominal
high-voltage rating of 14400 (not available in combination with
dual high-voltage switch)
• Externally operable dual high-voltage switch (not available in
combination with high-voltage tap switch)
• Fault indicators or fault indicator mounting provisions only
• Internal expulsion fuses, alone or in combination with internal
backup current limiting fuses
• Draw-out expulsion fuses with isolation links, alone or in
combination with internal backup current limiting fuses
• MOV surge arresters, including under-oil or elbow types
• Drip shields for use with draw-out expulsion fuses
• Externally operable two-position or four-position high-voltage loadbreak switch
• Drain valve with sampling device
• Total stainless steel or hybrid (mild steel/ stainless steel) construction
• Temporary access service provision (conduit hole)
• Hexhead security bolt (pentahead standard)
• Amorphous Motor Core
• Silicone or Ester-based insulation fluid
• Tank ground connectors
• Laser engraved stainless steel nameplate (aluminum standard)
• Custom stenciling or labeling
We are China Pad Mounted Compact Type Three Phase Distribution Transformer manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Amorphous Transformer Products
33kv Sz11 Type on-Load Tap Changing Transformers
Type Sc (B) 11-33kv Dry-Type Transformer Dimensions with Protection Enclosure
Dry Type 33kv Power Transformer with off-Circuit Switch
Pad Mount Three Phase Dead Front ANSI Type Transformer Enclosure
230kv Three Phase Tap Changer Power Transformers
33kv Dry-Type Transformer Dimensions with Protection Enclosure
Popular Oil Transformet Products
6.6kv Prefabricated Substation Transformer Manufacturer
Type Scb10-630~3150kVA 11kv Dimension with Protection Enclosure
110kv and Above Rectifier Special Transformer
Step Voltage Regulator Oil Immersed
Vacuum Resin Cast Dry-Type Distribution Transformer
Popular Power Transformer Products
11kv 33kv Oil Immersed Power Transformer Distribution Transformer
11kv Scb10-630~3150kVA Distribution Transformer
Single Phase Overhead Conventional Pole Mounted Distribution Transformer 11kv
Overhead Self Protected Single Phase Pole Mounted Distribution Transformer
630~2500kVA 11kv 12kv 15kv Dry Transformers
Popular silverstone-electric Products
Sc (H) B11-630~2500kVA 11kv Distribution Transformers
High Voltage Top Station Porcelain Insulator ANSI 57-2
132kv Three Phase Tap Changer Power Transformers
APG Cast Epoxy Resin Post Support Insulator
132kv Rectifier Special Transformer Factory
Hot Dipped Galvanized DIN 741 Malleable Wire Rope Clips
Tags: Amorphous Transformer, Oil Transformet, Power Transformer, silverstone-electric