Three Phase Pad Mounted Compact Type Distribution Transformer
Three Phase Pad Mounted Compact Type Distribution Transformer image
Get Latest Price Request a quote
Quick Details
Product Details
Three-Phase Pad-Mounted Compact Type
Compact Type is a three-phase pad-mounted transformer housed in a minimum profile enclosure. It is designed for applications requiring three-phase service in a small, unobtrusive package and is the ideal choice for small commercial loads. The design is easier to handle, install and maintain. Its removable flip-up hood allows easy access to the terminal compartment.
Click to enlarge
Ratings
• KVA Ratings (65° Rise, ONAN)
30, 45, 75, 112.5, 150
• High-Voltage Ratings (Delta or Wye)
2400 through 34500 (through 150 kV BIL)
• Low-Voltage Ratings (Delta or Wye)
120 through 480 (through 30 kV BIL)
Standard Features
• Meets or exceeds applicable IEEE, NEMA, and DOE standards (except for certain
dimensional characteristics)
• Full compliance with ANSI C57.12.28 enclosure integrity standards
• Externally clamped universal high-voltage bushing wells for
dead front applications (three for radial feed operation
or six for loop feed operation)
• Externally clamped low-voltage bushings with threaded stud for full-load
current through 1400 Amps, or externally clamped one-piece
NEMA spade bushings for full-load current above 1400 Amps
• Front panel accessory mounting brackets
• Removable neutral ground strap in low-voltage compartment
(for wye connected low-voltage ratings only)
• Lifting provisions
• Removable hood with stainless steel hinge pins and barrels
• Removable sill with stainless steel fasteners
• Recessed hood latching system with captive pentahead security bolt,
floating nut and interlocking padlock provision
• Tank ground provisions
• Mild steel tank and terminal compartment
• Insulated high-voltage/low-voltage compartment barrier
• Domed top surfaces on tank and terminal compartment to prevent water retention
• Recessed tank compartment bottom
• Electrostatically applied powder paint finish with olive-green
polyurethane top coat (Munsell 7GY 3.29/1.5) provides
excellent resistance to chipping, fading, abrasion, and corrosion
• Oil fill/oil level plug
• Automatic pressure relief device mounted in terminal compartment
• Electrical grade mineral oil insulation fluid with oxidation inhibitor
• Laser engraved anodized aluminum nameplate
• Decal bushing designations
Optional Features
• Loadbreak high-voltage bushing inserts or externally clamped integral
(one piece) high-voltage bushings
• Low-voltage connectors, including various screw-on or slip-on types
• Externally operable non-loadbreak high-voltage tap switch with one
of the following tap ranges: four 2.5% taps above normal;
or four 2.5% taps below normal;
or two 2.5% taps above and two 2.5% taps below normal;
or taps at 13800/13200/12870/ 12540 for transformers with a nominal
high-voltage rating of 14400 (not available in combination with
dual high-voltage switch)
• Externally operable dual high-voltage switch (not available in
combination with high-voltage tap switch)
• Fault indicators or fault indicator mounting provisions only
• Internal expulsion fuses, alone or in combination with internal
backup current limiting fuses
• Draw-out expulsion fuses with isolation links, alone or in
combination with internal backup current limiting fuses
• MOV surge arresters, including under-oil or elbow types
• Drip shields for use with draw-out expulsion fuses
• Externally operable two-position or four-position high-voltage loadbreak switch
• Drain valve with sampling device
• Total stainless steel or hybrid (mild steel/ stainless steel) construction
• Temporary access service provision (conduit hole)
• Hexhead security bolt (pentahead standard)
• Amorphous Motor Core
• Silicone or Ester-based insulation fluid
• Tank ground connectors
• Laser engraved stainless steel nameplate (aluminum standard)
• Custom stenciling or labeling
Factory Inspection
We are China Three Phase Pad Mounted Compact Type Distribution Transformer manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Amorphous Transformer Products
11kv Sz11 Type on-Load Tap Changing Transformer IEC
Type Sc (B) 11-33kv Dry-Type Transformer Dimensions with Protection Enclosure
11kv 12kv 15kv 30~1000kVA Distribution Transformers
33kv Medium Voltage Dry Type Distribution Transformers
33kv Sz11 Type on-Load Tap Changing Transformers
ANSI Type Three Phase Pad Mount Dead Front Transformer
Popular Oil Transformet Products
33kv Low Loss Oil-Immersed Power Transformer
Type Sc (B) 11-24kv Dry-Type Transformer Dimensions with Protection Enclosure
Pole Mounted Three Phase Overhead Distribution Transformer
Micro Power Pole Mounted Distribution Transformer
Factory Supply Oil-Immersed Power Transformer
Pad Mount Three Phase Live Front Distribution Transformer
Popular Power Transformer Products
230kv 132kv Oil-Immersed Power Transformer IEC Standard
Dry Type 33kv Power Transformer with off-Circuit Switch
OEM Three Phase Overhead Pole Mounted Distribution Transformer
Type Sc (B) 11-33kv Dry-Type Transformer Dimensions with Protection Enclosure
33kv on-Load Tap Changing Transformers
Three Phase Pad Mount Dead Front ANSI Type Transformer Enclosure
Popular silverstone-electric Products
132kv 126kv 110kv Low Loss Oil-Immersed Power Transformer
Factory Manufacture 160kn Normal Disc Insulator
10kv to 500kv Transformer Porcelain Bushing for Transformer/Busbar
Electrical Cable Sleeve Heat Shrink Tube
Tags: Amorphous Transformer, Oil Transformet, Power Transformer, silverstone-electric