Parallel Clamp
Parallel Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
4 | Material name | Aluminum compression connector Type H, 3/0 AL 3/0 ACSR |
|
5 | Raw material | Bimetallic aluminum pressure stretched, with high degree of hardness Rockwell RH30, high conductivity 1100-0 | |
6 | Rules | ANSI C119.4, UL486 A | |
7 | Quality certificate | ISO 9001 | |
8 | Kind | H | |
9 | Main gauges | 3/0 – 4/0 ACSR | |
10 | Caliber derivation | 3/0 – 4/0 ACSR | |
11 | Type of conductor to be connected | Aluminum, copper and ACSR | |
12 | Slot with rust inhibitor | Yes | |
13 | Height approx. | inch(mm) | 1-1 / 2 (38.10) |
Length approx. | inch(mm) | 2- 1/2 (63.5) | |
14 | Width approx. | inch(mm) | 6/7 (21.77) |
15 | External Comma | The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface |
|
16 | Inhibitory compound | Each connector must present in the slot a Composite of the oxide and galvanic corrosion |
|
17 | Identification mark | Each connector should be marked with the manufacturer’s symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer’s brand and name, which must necessarily be indicated on the body of the connector |
|
18 | Packaging | Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation. |
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
We are China Parallel Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
High Quality Overhead Bare Aluminum AAC AAAC ACSR Aacsr Conductor
Bare Aluminium Stranded ACSR Conductor 100mm 120mm 240mm
ACSR Conductor Price List ACSR 95mm2 Cable ACSR Wire Sizes
Duplex Service Drop Aluminium Conductor
DIN 120mm2 800mm2 Bare Stranded All Aluminum Alloy Conductor AAAC
Aluminium Steel Reinforced ACSR Bare Conductor
Popular jgtrade1 Products
Jbb-10parallel Clamps for AAC & ACSR Conductor
High Voltage Incoming and Outgoing Panel Cabinet Switchgear
China Supplier High Voltage Tinned Copper Wires Removable Fuse Link Button Type Fuse Link
Popular Pole Line Hardware Products
Hl Preformed Rod Conductor ACSR 556.4 Mcm
High Strength Aluminum Deadend Strain Clamp
U Shape Anchor Shackle for Pole Line Hardware
OEM Spool Bolt Hot DIP Galvanized
Cable Sleeve 95-240 mm² Screw Connection
Popular Tension Clamp Products
High Quality Wedge Bolted Type Tension Clamp
Aerial Wedge Type Tension Clamp Nxj-1
Support Type Double Flexible Terminal Connectors Type Msy
Wedge Type Aluminum Alloy Tension Clamp
High Quality Wedge Type Strain Clamp
Power Fittings Nld-1 Bolt Type Hot-DIP Galvanized Tension Clamp Strain Clamp
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp