Pre-Insulated Compression Joint No. 2 to 2 AWG
Pre-Insulated Compression Joint No. 2 to 2 AWG image
Get Latest Price Request a quote
Quick Details
Product Details
Full pre-siled traction joint for driver No.
2
Specify code and attach technical catalog of the model proposed by the manufacturer | |
Full pre-siled traction joint for driver No. 2 |
|
Tube or solid bar aluminium alloy |
|
Compressive thermoplastic will be such that it must guarantee the values of the Dielectric strength |
|
The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and in order to avoid its exit, it will be properly sealed at both ends |
|
ANSI C119.4, ASTM D 566 | |
The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning. |
|
mm | AAAC 2 AL 2 |
mm² | 33.62 |
inch(mm) | 3-15 / 16 (100) |
inch(mm) | 4/5 (20 |
daN | 1,100 |
Red Red | |
You must present engraving on the body name of the manufacturer, measure of Driver, tension, | |
The connectors must be packed in a highly resistant cardboard box for your transport, storage and handling |
8 | Rules | ANCI C119.4, IEEE 48-1996 | |
9 | Quality certificate | ISO 9001 | |
10 | Approval certificate | Attach certificate of acceptance of DN-DS |
|
11 | Permissible driver 3/0 | AWG | ACSR, AAC, AAAC, CU |
12 | Dimension | ||
13 | Nominal size of the driver |
AWG | No. 3/0 |
Diameter of driver applying approximate | mm | 11.53 | |
14 | Number of Holes | u | 2 |
15 | Identification color | Orange | |
Dimension | |||
16 | Diameter of the hole | inch(mm) | 9/16 (14.29) |
17 | Distance between holes | inch(mm) | 1-3 / 4 (44.45) |
18 | Approximate length (L) | inch(mm) | 3- 1/7 (80) |
19 | Width (W) | inch(mm) | Specify |
20 | Thickness | inch(mm) | 0.18 (4.57) |
21 | Dialing | You must present the mark or symbol of the manufacturer |
|
22 | Packaging | It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin |
Product | Tension Clamp 100-150mm Square | ||||||
Test Items | Test Content | Test Result | |||||
Sample 1 |
Sample 2 |
Sample 3 |
Sample 4 |
Sample 5 |
Remarks | ||
Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
Stoma Trachoma | √ | √ | √ | √ | √ | ||
Fins | √ | √ | √ | √ | √ | ||
Burr | √ | √ | √ | √ | √ | ||
Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
Inspector | Date: 18. June,2010 Approved: |
S/N | DETAILS | UNITS | DATA |
1. | Type | 100mm2 Compression type mid span joint complete with a tubular aluminium outer extrusion ,steel inner sleeve and two filler plugs |
|
2. | Material for outer extrusion |
Aluminium -99.5% purity | |
3. | Material for inner sleeve | HDG steel | |
4. | Type of inner sleeve | Tubular, suitable for compression into hexagonal shape |
|
5. | Suitable for the following ACSR Conductor Size |
mm2 | 100 |
6. | Resistivity | Less than 75% of the resistivity of an equivalent length of conductor. |
|
7. | Minimum failing load | kN | 35 |
8. | Operating ambient temperature |
°C | -1 to 40 |
9. | Relative Humidity | % | 85 |
10. | Altitude above sea level | m | 1400 |
CLAMP P/G ALUMINIUM/ALUMINIUM 100/100 MM2
S/N | TYPE | CONDUCTOR CROSS SECTION AREAS (mm2) |
NUMBER AND MATERIAL OF BOLT |
CLAMP BODY MATERIAL |
DIMENSI ONS |
1. | Aluminium/Aluminiu m conductor connection |
100/100 | 2 X Galvanised mild steel bolts |
Aluminium | As per Drawing No.E11389 shown below |
Other dimensions | |||||
2. | Drawings showing dimensions to be provided with bid |
Yes/No | Yes | ||
3. | Previous type tests results/certificate to be provided with bid |
Yes/No | Yes | ||
4. | Quality assurance certificate to be provided with bid |
Yes/No | Yes | ||
5. | Applicable standard | IEC standards |
We are China Pre-Insulated Compression Joint No. 2 to 2 AWG manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Connectors Products
PC Series Ipc Insulation Piercing Connectors
Cable Clamps Copper Dead-End Clamps Copper
Insulated Piercing Connectors 1kv Series Products
Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG
Insulated Piercing Connectors; ;
H Parallel Groove Compression Tap Connector Aluminum Connector
Popular jgtrade1 Products
13G Nitrile Glovespolyesterblack 7-11
13G PU Gloves Polyester/Nylon Black 6-11
2 Threads Latex Glovespolyester Linerorange7-11
Ceramic Drop Fuse 11kv 20kv 24kv 33kv 36kv 38kv 100A 200A 300A Circuit Breaker
Hy5wz-3.8/13.5 Zinc-Oxide Arrester
Popular Splice Products
Splice Full Traction ACSR Mcm AWG No. 336.4 Linnet
Splice Compression Sleeve Preinsulated No. 3/0 to 3/0 AWG
Splice Full Traction ACSR-AAAC No. 4 AWG
Good Quality Dome Type Optical Fiber Splice Closure 48 Fibers
Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG
Horizontal Type Optical Fiber Cable Plastic Splice Closure 24 Fibers
Popular Splice Compression Preinsulated Products
Splice Full Traction ACSR-AAAC No. 2 to 2 AWG
Splice Compression Sleeve Preinsulated No. 3/0 to 3/0 AWG
Splice Full Traction ACSR Mcm AWG No. 336.4 Linnet
Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG
Splice Full Traction ACSR - AAAC No. 3/0 AWG
Splice Compression Preinsulated No. 1/0 to 1 / 0 AWG
Tags: Connectors, jgtrade1, Splice, Splice Compression Preinsulated