Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG

Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG image

Get Latest Price Request a quote

Quick Details

Product Name:

Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

85351000

Product Details

variety of connector products to fit most distribution applications. Installation methods may be automatic, bolted, or compression to connect various sizes and types of popular conductors (aluminum, copper, or bi-metallic) and support wires.
Full pre-siled traction joint for driver No.

4	Material name		Pre-insulated compression sleeve coupling 4/0 to 4/0 AWG
5	Raw material of the driver		Tube or solid bar made of aluminum alloy
6	Insulation material		Thermoplastic resistant to compression shall be such that it must guarantee the values of dielectric strength
7	Pre-insulated compression splice design		tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and to prevent its exit will be supplied properly plugged at both ends
8	Rules		ANSI C119.4, ASTM D 566
9	ISO Certificate		9001 or recent
10	Approval certificate		Attach the acceptance certificate DN-DS
9	Finish		The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning.
10	Main range of driver input	AWG	4/0
11	Output range	AWG	4/0
12	Admissible section	mm²	107.2
13	Approximate length	inch(mm)	5-1 / 2 (139.7)
14	Approximate maximum diameter of the sleeve	inch(mm)	0.564 (14.32)
15	Approximate minimum diameter of the sleeve	inch(mm)	0.522 (13.25)
16	Maximum tension	daN	2,940
17	Color A-B		Pink-Pink
18	Identification Mark		Each splice must present the engraving on the body, name of the manufacturer, country of origin, range of driver, tension.
19	Packaging		The hose couplings of Pre-insulated compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

	Specify code and attach technical catalog of the model proposed by the manufacturer
	Full pre-siled traction joint for driver No. 2
	Tube or solid bar aluminium alloy
	Compressive thermoplastic will be such that it must guarantee the values of the Dielectric strength
	The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and in order to avoid its exit, it will be properly sealed at both ends
	ANSI C119.4, ASTM D 566
	The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning.
mm	AAAC 2 AL 2
mm²	33.62
inch(mm)	3-15 / 16 (100)
inch(mm)	4/5 (20
daN	1,100
	Red Red
	You must present engraving on the body name of the manufacturer, measure of Driver, tension,
	The connectors must be packed in a highly resistant cardboard box for your transport, storage and handling

8	Rules		ANCI C119.4, IEEE 48-1996
9	Quality certificate		ISO 9001
10	Approval certificate		Attach certificate of acceptance of DN-DS
11	Permissible driver 3/0	AWG	ACSR, AAC, AAAC, CU
12	Dimension
13	Nominal size of the driver	AWG	No. 3/0
	Diameter of driver applying approximate	mm	11.53
14	Number of Holes	u	2
15	Identification color		Orange
	Dimension
16	Diameter of the hole	inch(mm)	9/16 (14.29)
17	Distance between holes	inch(mm)	1-3 / 4 (44.45)
18	Approximate length (L)	inch(mm)	3- 1/7 (80)
19	Width (W)	inch(mm)	Specify
20	Thickness	inch(mm)	0.18 (4.57)
21	Dialing		You must present the mark or symbol of the manufacturer
22	Packaging		It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin

Product	Tension Clamp 100-150mm Square
Test Items	Test Content	Test Result
Test Items	Test Content	Sample 1	Sample 2	Sample 3	Sample 4	Sample 5	Remarks
Visual Inspection	Crack	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date: 18. June,2010 Approved:

S/N	DETAILS	UNITS	DATA
1.	Type		100mm2 Compression type mid span joint complete with a tubular aluminium outer extrusion ,steel inner sleeve and two filler plugs
2.	Material for outer extrusion		Aluminium -99.5% purity
3.	Material for inner sleeve		HDG steel
4.	Type of inner sleeve		Tubular, suitable for compression into hexagonal shape
5.	Suitable for the following ACSR Conductor Size	mm2	100
6.	Resistivity		Less than 75% of the resistivity of an equivalent length of conductor.
7.	Minimum failing load	kN	35
8.	Operating ambient temperature	°C	-1 to 40
9.	Relative Humidity	%	85
10.	Altitude above sea level	m	1400

CLAMP P/G ALUMINIUM/ALUMINIUM 100/100 MM2

S/N	TYPE	CONDUCTOR CROSS SECTION AREAS (mm2)	NUMBER AND MATERIAL OF BOLT	CLAMP BODY MATERIAL	DIMENSI ONS
1.	Aluminium/Aluminiu m conductor connection	100/100	2 X Galvanised mild steel bolts	Aluminium	As per Drawing No.E11389 shown below
	Other dimensions
2.	Drawings showing dimensions to be provided with bid	Yes/No	Yes
3.	Previous type tests results/certificate to be provided with bid	Yes/No	Yes
4.	Quality assurance certificate to be provided with bid	Yes/No	Yes
5.	Applicable standard		IEC standards

We are China Splice Compression Sleeve Preinsulated No. 4/0 to 4/0 AWG manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote