Rz1-K Mica Cond Cu Fire Rated Cable Fire Resistant Halogen Free Cable

Standard:
UNE 211 025, IEC 60502-1
Fire Performance

Halogen free: IEC 60754-1, EN 50267-2-1
No corrosive gases: IEC 60754-2, EN 50267-2-2
Low smoke density: IEC 61034, EN 50268-2
Flame retardant: IEC 60332-1, EN 50265-2-1
Fire resistant: UNE-EN 50200 PH90, UNE-EN 50362 PH90, IEC 60331-21
Non-flame propagating: IEC 60332-3, EN 50266-2
Construction:
Conductor: Plain annealed copper wire, solid according to IEC (EN) 60228 class 1 or Class 2.

Insulation: Mica glass tape covered by extruded cross-linked XLPE compound
Filling: Thermoplastic LSZH compound
Outer Sheath: Thermoplastic LSZH compound
Application:
These cables are specially designed to transmit electric power in the extrem conditions that there are in a large fire, assuring electric supply to emergency circuits, like signaling lights, fume extractors, acustic alarms, water pumps, etc. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is recommended in public places such as: hospitals, schools, museums, airports, bus terminals, shops in general, tunnels, the underground, etc., as well as in calculation centres, offices, production plants, laboratories, etc.
Technical Data:
Rated Voltage: 0.6/1KV
Test Voltage: 3500V
Insulation resistance: ≥1000 MΩ x km (at 20°C)
Maxium Temperature range during operation:  +90°C
Short circuit temperature: 250°C
Minimum bending radius: 5x Overall Diameter
Cable Parameter: