SPD Surge Protector Device Arrester
SPD Surge Protector Device Arrester image
Get Latest Price Request a quote
Quick Details
Product Details
High Voltage Substation Lightning Arresters Manufacturers of 66kV Surge Arrester
0.25kV~750kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Surge Arresters’ Technical Parameters:
Type | Y10W5-66/176 |
Rated voltage———kV | 66 |
MCOV —————-kV | 52.8 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 221 |
8/20μS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
1mA D.C reference voltage (kV) | 96 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10μS High current impulse kA | 100 |
Lightning impulse withstand kV | 325 |
Power frequency voltage withstand(dry/wet)kV | 140 |
0.1S TOV————–kV | 79.2 |
1S TOV—————-kV | 75.9 |
10S TOV—————kV | 72.6 |
1200S TOV————-kV | 66 |
Creepage distance —-mm | 2500 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition: | Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | ||||||||
48HZ<Rated frequency<62HZ | ||||||||
Power frequency voltage should not be more than continuous running voltage | ||||||||
Max wind speed should be less than 35m/s | ||||||||
Earthquake intensity should be less than 7 degree | ||||||||
If used in contamination area, should be noted in advance. |
Lightning Arresters Production:
We are China SPD Surge Protector Device Arrester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arrester Products
Hot Sell Gapless Zinc Oxide Lighting Arrester
12kv Polymer Lightning Arrester/Surge Arrester
Good Quality Disconnecting Device for Surge Arrester
Zinc Oxide Block for Surge Arrester
Electrical Item List Composite Polymeric Housed MOV Arrester
Type of Surge Arrester/Low Voltage Lighting Arrester
Popular hzyddq Products
Zinc Oxide Lightening Protector High Quality
Disconnect Switch with Drive Mechanism
SMD Resistor Voltage Dependent Resistor
Height 24mm Lighting Arrester Components Zinc Oxide Resistor/ Varistor
Power Equipment 6-9kv Electrical Surge Arrester Low Voltage
Popular Surge Arrester Products
24kv Porcelain Surge Arrester, Lightning Arrester,
Power Distribution Equipment Mini 12V Surge Protection Device
9kv Silicon Type Surge Arrester Cma5w-9
Popular Surge Protector Products
24kv Station Class Composite ZnO Lightning Arrester Surge Diverter
24kv Polymer ZnO Lightning Arrester/Surge Arrester
110kv Polymeric Housed Metal-Oxidesurge Arrester
0.25~765kv Polymer (Porcelain) Housed Lightning Arrester with Kema Type Test
11kv-30kv Gapless Lightning Arrester Polymer Surge Arrester
Manufacturer 18kv-36kv Low Voltage ZnO Polymer Lightning Arresters
Tags: Arrester, hzyddq, Surge Arrester, Surge Protector