Strain Plate, 6"X3/8"X1FT, 5-1/2"Cat
Strain Plate, 6"X3/8"X1FT, 5-1/2"Cat image
Get Latest Price Request a quote
Quick Details
Product Details
AL 2 – 6 ACSR.
4 | Connector name | Type H aluminum compression connector, 2 – 6 AL 2 – 6 ACSR. |
|
5 | Raw material | The connectors must be made of alloy pressure-stretched aluminum, with a high degree of hardness Rockwell RH30, or a ductile aluminum high conductivity alloy 1100-0, which is a highly pure aluminum |
|
6 | Rules | ANSI C119.4 | |
7 | Quality certificate | ISO-9001 or recent | |
8 | Finish | The surface of the connectors should be smooth , free of astilaldura or imperfections |
|
9 | Shape | H | |
10 | Main Calibres Range | ACSR | # 2 |
11 | Secondary Calibers Range | ACSR | # 2 |
12 | High | inch(mm) | 1.12 (31) |
13 | Long | inch(mm) | 1.5 (29) |
14 | Width | inch(mm) | 0.7 (18) |
15 | External Comma | The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface |
|
16 | Inhibitory compound | Each connector must present in the slot a Composite of the oxide and galvanic corrosion |
|
17 | Identification mark | Each connector should be marked with the manufacturer’s symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer’s brand and name, which must necessarily be indicated on the body of the connector |
|
18 | Packaging | Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation. |
for cable #2
4 | Connector name | Aluminum compression connector type H, 1/0 – 3 AL 2 – 6 ACSR. |
|
5 | Raw material | The connectors must be made of alloy pressure-cast aluminum, with a high degree of Rockwell RH30 hardness, or a 1100-0 high conductivity aluminum ductile alloy, which is a highly pure aluminum |
|
6 | Rules | ANSI C119.4 | |
7 | Quality certificate | ISO-9001 or recent | |
8 | Finish | The surface of the connectors should be smooth , free of astilaldura or imperfections |
|
9 | Shape | H | |
10 | Main Calibres Range | ACSR | 1 / 0-3 |
11 | Secondary Calibers Range | ACSR | 2-6 |
12 | High | inch(mm) | 1.2 (30) |
13 | Long | inch(mm) | 1.75 (44) |
14 | Width | inch(mm) | 0.70 (18) |
15 | External Comma | The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface |
|
16 | Inhibitory compound | Each connector must present in the slot a Composite of the oxide and galvanic corrosion |
|
17 | Identification mark | Each connector should be marked with the manufacturer’s symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer’s brand and name, which must necessarily be indicated on the body of the connector |
|
18 | Packaging | Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation. |
Diagram is not drawing to scale.
Material:
Coating:
Dimensions:
Thickness:
Circle Dia.
Steel
Dip Galvanized, ASTM A- 153
Shown in the picture above (fig. 2)
3/8 in.
7/8
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
4 | Connector name | Compression connector grounding pin for cable # 2 | |
5 | Raw material | Body: Electrolytic copper manufactured by extrusion, high resistance- With inhibitor | |
6 | Driver to press | Copper | |
7 | Driver to connect on the pike grounding |
AWG | 2 |
8 | Applied standards | ANSI C 119.4, IEEE837 | |
9 | Quality certificate | ANSI C 119.4, IEEE837 | |
10 | Main admissible diameter | inch(mm) | 5/8 (15.8) |
11 | Permissible diameter | inch(mm) | 0.29 to 0.23 (7.4 to 5.8) |
12 | DN-DS certificate | Attach acceptance certificate and homologation |
|
13 | Identification mark | Each connector should be marked on the body with the manufacturer symbol, catalog number, application driver ranges and die number to occupy with the hydraulic tool for installation |
|
14 | Packing | The connectors should be in a package that indicates in its exterior the range of application and prevent external agents from damaging it and causing premature oxidation |
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.
Product | D Bracket | ||||||
Test Items | Test Content | Test Result | |||||
Sample 1 |
Sample 2 |
Sample 3 |
Sample 4 |
Sample 5 |
Remarks | ||
Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
Stoma Trachoma | √ | √ | √ | √ | √ | ||
Fins | √ | √ | √ | √ | √ | ||
Burr | √ | √ | √ | √ | √ | ||
Galvanizing thickness | μm | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion: |
Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
Inspector | Date: 02. March,2011 Approved: |
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Electronic Connector
Electric Connector
Terminal Connector
Copper Connector
Plastic Connector
We are China Strain Plate, 6"X3/8"X1FT, 5-1/2"Cat manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Compression Clamp Products
Aluminum Compression Terminals Cable to Flat SY
Aluminum Alloy 630/660mm2 Hydraulic Compression Strain Clamp
Compression Connector Type # 2 ‐ # 2 Cu
Transmission Line Fittings Compression Type Strain Clamp Compression Clamp
Hl Preformed Rod Conductor ACSR 556.4 Mcm
Connector to Compression Type H 2-6 to - 2-6 to.
Popular Compression Connector Products
H Type Compression Tap Connector
Electrical Aluminum Connectors "H" Type
Aluminium Electrical Cable Clamp Connector Press Type H/Aluminium Wire Connector
Aluminum Compression Tap Connector H Clamp
Popular Compression Type Products
Connector to Compression Type H 3/0 to 1/0 ACSR.
Connector Wedge to Pressure 1/0 AWG with Stirrup
Connector to Compression Type H 2-6 to - 2-6 to.
Removable Connector for Footboard Hotline Clamp
Grip, Preformed 266.8mcm Patridge
Popular jgtrade1 Products
High Quality 11kv 33kv Outdoor High Voltage Drop out Fuse Cut out Polymer
Universal Knife Brake Maintenance Platform
Outdoor High Voltage Solid Sealed Vacuum Circuit Breaker
Tags: Compression Clamp, Compression Connector, Compression Type, jgtrade1