Terminals for Tubular Bus-Bar Type Mgh/S
Terminals for Tubular Bus-Bar Type Mgh/S image
Get Latest Price Request a quote
Quick Details
Product Details
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
4 | Name of the material | Machine bolt 5/8 "x 14 | |
5 | Raw material of manufacture | Steel | |
6 | Finished | The machine bolt and the nut should have smooth, splinter-free surfaces that can affect their functionality. After the galvanizing operation, a centrifugation operation will be carried out to help uniformize the zinc layer in all the threaded parts and eliminate excesses. of zinc. The nut must have been repaired after hot dip galvanizing according to ANSI / ASTM A153 | |
7 | Standard applied | ASTM A153, ASTM A-307, ANSI B18.1.2 | |
8 | Quality certificate | ISO-9001 or recent | |
9 | accessories | Each bolt must include its square nut. | |
10 | Identification mark | You must present above the head the dimension and symbol of the factory | |
11 | Packaging | The bolts must be packed in a group of highly resistant cardboard box for their transportation, storage and handling. Each box must present a label where Specify the name of the fabericante, name of the material, measure and quantity of the group |
|
Dimensional characteristics | |||
12 | Bolt diameter | inch(mm) | 5/8(15.87) |
13 | Bolt Length | inch(mm) | 14(355.6) |
14 | Thread Length | inch(mm) | 6(152.4) |
15 | Minimum Resistance | kg(lb) | 5,624(12,400) |
16 | Weight | lbs | 1.26 |
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Power Line
Electrical Hardware
Electric Power Car
Network Hardware
Hardware Cable
We are China Terminals for Tubular Bus-Bar Type Mgh/S manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
All Aluminum Conductor with ASTM B231 Standard
Five or More Core Aluminium Conductor Overhead Cable
Parallel Groove Copper Aluminum Clamps
Popular jgtrade1 Products
33kv High Voltage Composite Post Insulator / Electrical Polymer Insulator
Type“ 11” Earthwire to Earthwire
Cut Resistance Gloves, Nitrile Sandy Finishhppe + Dyneema + Tprblack 7-11
High -Voltage Isolate Switch 12kv 600A
Iacm Switch Disconnector 50A - 36kv with Socket and Command
Popular Pole Line Hardware Products
Galvanized Steel Down Lead Clamp for ADSS Cable
New Design Down Lead Clamp for ADSS for Pole
Galvanized Steel Cable Storage Assembly
Galvanized Extension Link for Pole Line Hardware
High Voltage Disc Suspension Toughened Glass Insulator for Overhead Line Fittings
Stainless Steel Band, Buckle, Strapping Tools for Cable Clamp
Popular Tension Clamp Products
PA2000 Wedge Type Tension Clamps for 50-70 mm2 Cable
Aluminium Alloy Strain Clamp Nll-6D
PA2000 Wedge Dead End Clamp/ Anchor Clamp/Tension Clamp/Suspension Clamp/Strain Clamp
H. D. G. Bolted Type Strain Clamp
Aluminum Tension Strain Clamp for Power Line Hardware (PAM1500)
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp