Three Phase Pad Mount Live Front Distribution Transformer
Three Phase Pad Mount Live Front Distribution Transformer image
Get Latest Price Request a quote
Quick Details
Product Details
Three-Phase Pad-Mount Dead Front
SIlverstone Electric liquid-filled three-phase pad-mounted transformers are an excellent choice for any commercial or industrial underground distribution system. Typical applications include manufacturing facilities, refineries, office buildings, schools, hospitals, restaurants, warehouses, and retail stores. All Howard Industries transformers are designed, built, and tested in an ISO-9001 certified facility in accordance with applicable industry standards.
All designs feature fully enclosed tamper resistant terminal compartments and can be supplied with dead-front or live-front construction, for loop or radial feed applications.
Ratings
• KVA Ratings (65° Rise, ONAN)
45, 75, 112.5, 150, 225, 300, 500, 750, 1000, 1500, 2000,
2500, 3000, 3750, 5000, 7000, 7500, 10000
• High-Voltage Ratings (Delta or Wye)
2400 through 46000 (through 200 kV BIL)
• Low-Voltage Ratings (Delta or Wye)
120 through 8600 or 14400Y (through 110 kV BIL)
Standard Features
• Meets or exceeds current IEEE, NEMA, RUS, and DOE standards as applicable
• Full compliance with ANSI C57.12.28 enclosure integrity standards
• Externally clamped porcelain high-voltage bushings with eyebolt connectors
• Externally clamped low-voltage bushings with threaded stud for full-load current through 1400 Amps, or externally clamped one-piece NEMA spade bushings
for full-load current above 1400 Amps
• Removable neutral ground strap in low-voltage compartment
(for wye connected low-voltage ratings only)
• Removable high-voltage/low-voltage neutral link, internally mounted
and accessible through tamper-resistant hand hole (Wye-Wye units only)
• Lifting provisions
• Jacking/rolling provisions
• Removable terminal compartment and bottom sill and removable doors
with stainless steel hinges
• Bolted hand hole on oil compartment top with tamper-resistant security cover
• Three-point door latching system with recessed interlocking
pentahead security bolt and padlock provision
• Tank ground provisions
• Mild steel tank and terminal compartment construction
• Mild steel high-voltage/low-voltage compartment barrier
• Domed top surfaces on tank and terminal compartment to prevent water retention
• Recessed tank compartment bottom
• Electrostatically applied powder paint finish with olive-green polyurethane
top coat (Munsell 7GY 3.29/1.5) provides excellent resistance to chipping, fading,
abrasion, and corrosion
• Oil fill/oil level plug
• Automatic pressure relief device mounted in terminal compartment
• Oil drain valve with sampling device
• Electrical grade mineral oil insulation fluid with oxidation inhibitor
• Laser engraved anodized aluminum nameplate
• Decal bushing designations
Optional Features
• Loadbreak high-voltage bushing inserts or externally clamped integral
(one piece) high voltage bushings for dead-front applications
• Low-voltage connectors, including various screw-on or slip-on types
• Insulated interphase barriers
• Lightning arrester mounting provisions
• Externally operable nonloadbreak high-voltage tap switch with one of the
following tap ranges: four 2.5% taps above normal;
or four 2.5% taps below normal;
or two 2.5% taps above and two 2.5% taps below normal;
or taps at 13800/13200/12870/ 12540 for transformers with a
nominal highvoltage rating of 14400 (may not be available in combination
with dual high-voltage switch)
• Externally operable dual high-voltage switch (may not be available
in combination with highvoltage tap switch)
• Fault indicators or fault indicator mounting provisions only
• Internal expulsion fuses, alone or in combination with internal
backup current limiting fuses
• Draw-out expulsion fuses with isolation links, alone or in combination
with internal backup current limiting fuses
• Draw-out full-range current limiting fuses in dry-well canisters;
with or without interlocking loadbreak switch
• Internal full-range current limiting fuses
• Arc Strangler® fused disconnect switches
• MOV surge arresters, including under-oil or panel-mounted types
• Drip shields for use with draw-out expulsion fuses
• Externally operable two-position or four-position high-voltage loadbreak switch
• Internal low-voltage circuit breaker with external operating handle,
or external molded case low-voltage circuit breakers
• High capacity pressure relief device mounted on tank cover
• Drain valve with sampling device
• Total stainless steel or hybrid (mild steel/ stainless steel) construction
• Temporary access service provision (conduit hole)
• Hexhead security bolt (pentahead standard)
• External Watt-hour meter base with or without meter, or mounting provisions only
• External potential transformers
• External current transformers
• Tank ground connectors
• Cover mounted throat for bus duct connection
• Dial type temperature gauge
• Dial type liquid level gauge
• Dial type pressure/ vacuum gauge
• Cooling fans or fan mounting provisions only
• Amorphous Metal Core
• Seed-based vegetable oil insulation fluid
• Laser engraved stainless steel nameplate (aluminum standard)
• Custom stenciling or labeling
• NEMA safety labels
• Compliance with Canadian Standards Association (CSA) standards
or other non-US standards
Factory Inspection
We are China Three Phase Pad Mount Live Front Distribution Transformer manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Amorphous Transformer Products
33kv Medium Voltage Dry Type Distribution Transformers
Three Phase Pad Mount Mobile Power Distribution Transformer 11kv
Sc (H) 11-30~500kVA 10kv Distribution Transformers
11kv 33kv Type Sc (B) Dry-Type Transformer Dimensions with Protection Enclosure
132kv Three-Phase off-Circuit Tap Changing Power Transformers with Low-Loss and Low-Noise
Medium Voltage Dry Type Distribution Transformers 33kv
Popular Oil Transformet Products
132kv Level and Below Furnace Transformer Tap Changing Oltc IEC
33kv S11 Type off-Circuit Tap Changing Transformers
230kv 132kv 126kv Oil-Immersed Power Transformer IEC Standard
230kv 132kv Oil-Immersed Power Transformer IEC Standard
Vacuum Press Impregnated Dry-Type Transformer Power Transmission
Energy Saving Delta Core Oil Immersed Power Transformer
Popular Power Transformer Products
Prefabricated Substation Transformer Enclosure 11kv 33kv
11kv Single Phase Pole Mounted Transformer 50 kVA 100 kVA 375kVA
Three Phase Pad Mount Distribution Transformer
Manufacture 11-24kv Dry-Type Power Transformer
Three Phase Two Winding off Circuit Tap Changing Transformers 33kv
Vacuum Press Impregnated Dry-Type Transformer Power Transmission
Popular silverstone-electric Products
Oil-Immersed Power Transformer 11kv 33kv
Factory Supply Cheap Clamp-on Current Transformer
High Quality 20kv 24kv Oil-Immersed Power Transformer
Step Voltage Regulator 11kv Voltage Stabilizer
Aluminum Alloy Bolted Type Dead End Clamp Tension Clamp Nll-1 Nll-2 Nll-3 Nll-4 Nll-5
Indoor Bus Bar Support Insulators Insulation
Tags: Amorphous Transformer, Oil Transformet, Power Transformer, silverstone-electric