Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

China 
                Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type
              manufacture and supplier

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type image

Get Latest Price Request a quote

Basic Info.

Parts
Not Be Dropped

Bolt Quality
1-3

Features
Light Weight

Transport Package
Paper Box

Specification
120*150*60mm

Trademark
CNKC

Origin
China

Production Capacity
10000 Pices/Monthly

Product Description

Product Description

T-clamp refers to the hardware used to connect the conductor with the branch line to transfer electrical load. High voltage transmission line is an important part of power grid, which connects substations and transmits power. In the design of transmission lines, we can see the connection mode of line T-connection. T-connection lines are two lines with different spatial levels connected by short circuit at the intersection of the same voltage level. Substation A supplies power to substations B and C at the same time. The advantages are that investment is reduced and a substation bay is used less. This way of connecting another line from the main line is vividly called “T” connection mode, This outgoing point is called “T contact”.
T-type clamp is mainly used for overhead circuit lines or substations, which leads down current branches on the main bus in a “T” mode. There are two types: bolt type and compression type. For small section conductors, the so-called T-type connection can also be used with parallel groove clamps or clamped elliptical splicing tubes.
TL series single conductor T-clamp is a kind of T-clamp used to connect branch conductor to the trunk conductor, including: T-shaped substrate, with trunk groove in the transverse part, with wire holes in the longitudinal part, metal linings are set on the inner wall of trunk groove and branch hole, and the two metal linings are connected as a whole, and the upper surface of the longitudinal part of the substrate is threaded with branch conductor compression screws; Trunk slot cover is inserted with trunk slot, and its upper surface is screwed with dry conductor compression screw; The T-shaped upper cover is buckled with the T-shaped base. When connecting, only the simple work of fastening screws is needed, which saves time and labor; The branch wire and the dry wire are in close contact with the metal lining through the compression screw, and the contact area is large, so the connection is safe and reliable.

Technical parameters

Product features and instructions for use

Features:
a. The material of the wire clip is exactly the same as the wrapped material (stranded wire), thus ensuring strong corrosion resistance.
b. The special design of the T-clamp avoids the possibility of loss or damage of bolts, nuts, washers and other components during installation or operation, and has high reliability in operation.
c. The installation quality of the wire clamp is less affected by the human factors of the installation workers, the installation quality is consistent, and the installation process will not damage the wire.
d. The installation of the wire clip is simple and quick, without any tools, and one person can quickly complete the installation with bare hands on site

Instructions for use:
a. Select the appropriate T-connector for the type of follow-up wire. T-connectors of different specifications are irreplaceable.
b. The T-type wire clip is a one-time product, and should not be used repeatedly after bearing full tension.
c. This product is only suitable for installation by trained technicians.
d. Before installing the T-clamp, the wire should be thoroughly ground to remove the oxide layer, and a special conductive grease should be applied to the surface of the wire.
e. This product is a precision device. In order to ensure correct installation, it should be stored in a packaging box to prevent collision or heavy pressure during handling to avoid deformation of the pre-twisted wire.
f. When working in or near live lines, special attention must be paid to prevent electric shock accidents.
g. It is recommended to connect the bus bar and the down conductor to achieve electrical performance through jumper connection, and the T-shaped connecting bar only bears tension.

Product details

Products real shot

 

A corner of the production workshop

 

Product packagingProduct application case

 

 

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular Cable Wire Clamp Products

Byd 35-240mm2 1-10kv Overhead Insulated Power Line Electric-Check Grounding Ring Earthing Ring

Mnl 63-125mm Indoor Supports for Bar (vertical setting) Substation Fitting

Ttd 1kv 77-679A 1.5-400mm2 Waterproof and Flame-Retardant Insulation Piercing Connector for Street Lamp Distribution System Insulation Puncture Clamp

Ot 10-1000A 5.2-18.2mm Copper Passing Through Connecting Terminal Cable Lugs

Dl2 16-400mm2 8.4-17mm Double Hole Type Aluminium Connecting Terminal Cable Lug Electric Power Fitting

Ty 35-630mm² 20-70mm Electric Power Fittings Hydraulic T-Clamp Single Conductor Branch Clamp

Popular cnkcele Products

Bttz/Ng-a (BTLY) 0.6/1kv 2.5-400mm² 2-5 Cores Flame Retardant Mineral Insulated Copper Core Power Cable

Zr-Yjv 8.7/35kv 25-1200mm² 1-3 Core Medium and High Voltage Flame Retardant Cross-Linked Copper Core Power Cable

Jdz9 3/6/10kv 30-500va Dry-Type Fully Enclosed Single-Phase Indoor Hv Voltage Transformer

Kyn28 24kv 630A 2000A 4000A Armoured Removable AC Enclosed Switchgear

Yh/Yhf 200/400V 10-185mm² High Strength Rubber Sleeve Electric Welding Cable

Yq/Yqw/Yz/Yzw/Yc/Ycw 450/750V 0.3-150mm² 2-5cores Waterproof Flame-Retardant Rubber Sheathed Power Cable and Wires

Popular Overhead Conductor Clamp Products

PGA 10-300mm^2 34-133mm Energy-Saving Type Parallel Trench Wire Clamps for Overhead Cables

Jbt 16-240mm2 Overhead Cable Branch Wire Clamp Copper Parallel Trench Splicing Fitting

Tls 240-1440mm² 22-52mm Bolt Type Double Conductor T-Clamp Electric Power Fittings Cable Clamp

Dtga (SC) 4-1000mm2 6.2-22.5mm Peephole Copper Connecting Terminal Cable Lugs

Ca/CS/Es/PS Series 1kv 15-22kn Exit Type Aluminium Alloy Fixing Hook Bracket of Overhead Cable

Jbt 16-240mm² 60*40*35mm Overhead Cable Branch Wire Clamp

Popular Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type Products

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

Tags: , , ,

FAST AND RELIABLE SERVICE FOR YOUR PROJECT

Contact our trained experts today to find your perfect power solution.

ASK A QUESTION