Typical Distribution Mv Load Break Fuse Cutout with Arc Chute
Typical Distribution Mv Load Break Fuse Cutout with Arc Chute image
Get Latest Price Request a quote
Quick Details
Product Details
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Power Line
Electrical Hardware
Electric Power Car
Network Hardware
Hardware Cable
We are China Typical Distribution Mv Load Break Fuse Cutout with Arc Chute manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
DIN 120mm2 800mm2 Bare Stranded All Aluminum Alloy Conductor AAAC
Power Transmission Line Overhead Aerial Stranded Aluminium Conductor
Hot Sale Aluminium Stranded Conductor AAC
Parallel Groove Clamp Capg Pg Clamp
All Aluminum Conductor with ASTM B231 Standard
Single Core 10kv 15kv Aluminium Conductor 240mm2 Aerial Cable
Popular jgtrade1 Products
Polymer Fuse Cutout, Drop out Fuses 27kv 300A
Fuse Cutout, Drop out Fuses 11-22kv
Polymer Fuse Cutout, Drop out Fuses 21 Kv 300A
Popular Pole Line Hardware Products
IEC 160kn Pole Line Hardware/ Socket-Clevis Line Fitting
Hot DIP Galvanized Forged Carbon-Steel Socket Eye Clevis Socket Tongue
Flat Steel Single Spool Secondary Rack for Stringing Conductors
Hot-DIP Galvanized Forged Steel Ball Eye, Insulator Fitting, Insulator Pin
Dtl-1 Cu-Ai Connecting Terminal
ADSS Suspension Clamp for Wire as Adjustable Plastic Cable Fitting
Popular Tension Clamp Products
600m Span Cable Two Ammor Rods Tension Sets
Tension Clamp Strain Clamp Anchoring Clamp
Universal Cricket Type Scissors for Φ up to 34 mm
Nld-3 Hot-DIP Galvanized Iron Tension Clamp
PA2000 Wedge Dead End Clamp/ Anchor Clamp/Tension Clamp/Suspension Clamp/Strain Clamp
Parallel Groove Clamp Capg Pg Clamp
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp