12kv Expilsion Fuse Fuseholders
12kv Expilsion Fuse Fuseholders image
Get Latest Price Request a quote
Quick Details
Product Details
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW DTF has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
Performance Characteristic | |
Applied standard | IEC60282-2 |
Catalog number | |
Nominal system voltage kV | 11 |
Rated Frequency Hz | 50 |
Rated m aximum(design) voltage | 12 |
Rated Continuous current A-RMS | 100 |
Rated Interrupting current asymmetrical/symmetrical A-RMS | 12000/8000 |
BIL 1.2×50 µs kV-peak | 125 |
Minimum critical impulse flashover voltage(CFO)KV peak | 140 |
Dry withstand voltage kV-RMS | 42 |
Wet withstand voltage kV-RMS | 36 |
Creepage distance to group Min.mm | 372 |
Minimum creepage factor of insulator (Creepage Distance/arcing distance) | N/A |
We are China 12kv Expilsion Fuse Fuseholders manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Drop out Fuses Products
Standard High Voltage Cutout Distribution
Polymer Fuse Cutout, Drop out Fuses 15 Kv 100A
Polymer Fuse Cutout, Drop out Fuses 21kv 200A
Polymer Fuse Cutout, Drop out Fuses 15 Kv 200A
Popular Fuse Cutout Products
Outdoor Expulsion Drop-out Type Distribution Fuse Cutout Series
11kv Outdoor High Quality Polymer Fuse Cutout
Line Hoop, Hoop Single Hanging Line Xtended Cable Hoop
Polymer Fuse Cutout, Drop out Fuses 27 Kv 200A
Nt H. R. C. Low Voltage Fuse and Base
33kv Drop out Fuse Assembly 100A /200A Porcelain Fuse Cut-out
Popular High Voltage Fuse Products
15g PU Gloves Polyester/Nylon Black 6-11
Cut Resistance Gloves, Nitrile Sandy Finishhppe + Dyneema + Tprblack 7-11
Polymer Fuse Cutout, Drop out Fuses 21kv 100A
Pcv Gloves with Long Sleeve Smooth/Sandy Finish Blue 60cm
Popular jgtrade1 Products
High Quality High Voltage Fuse Xrnt Type Vvp
Single Pole Fused Recloser by-Pass Switches 15kv 600A
Isolator Type Retained 3-1 / 2 "X 2-1 / 2", ANSI 54-1
Strain Clamps for Insulated Cable
Yh10W-33, Sharp Head 33kv 10ka Surge Arrester
Tags: Drop out Fuses, Fuse Cutout, High Voltage Fuse, jgtrade1