30 Kv Metal-Oxide Polymer Surge Arrester with Bracket
30 Kv Metal-Oxide Polymer Surge Arrester with Bracket image
Get Latest Price Request a quote
Quick Details
Product Details
Hangzhou Fuyang 30 kV Metal-oxide Polymer Surge Arrester with Bracket
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Surge Arresters’ Technical Parameters:
Type | YH10W5-30/81.6 |
Rated voltage———kV | 30 |
MCOV —————-kV | 24.4 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 88.5 |
8/20μS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 81.6 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 62.5 |
1mA D.C reference voltage (kV) | 42.5 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10μS High current impulse kA | 100 |
Lightning impulse withstand kV | 200 |
Power frequency voltage withstand(dry/wet)kV | 70 |
0.1S TOV————–kV | 36 |
1S TOV—————-kV | 34.5 |
10S TOV—————kV | 33 |
1200S TOV————-kV | 30 |
Creepage distance —-mm | 1082 |
Material employed in series non-linear resistor | Zinc Oxide |
MOA Production Process:
Working Condition:
- Environment temperature: -40–+40 degree
- altitude:<1000m
- 48HZ<Rated frequency<62HZ
- Power frequency voltage should not be more than continuous running voltage
- Max wind speed should be less than 35m/s
- Earthquake intensity should be less than 7 degree
- If used in contamination area, should be noted in advance.
We are China 30 Kv Metal-Oxide Polymer Surge Arrester with Bracket manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Lightning Arrestor High Voltage Metal Oxide Station Surge Arrestor
Kema Tested 220kv Equipment Substation Composite Moa Lightening Arrester
Distribution Line Metal-Oxide Polymeric Arrester with Kema Type Test Report
Hangzhou Electrical Equipment Supplies 220V Surge Protection Device
High Quality Znic Oxide/ Metal Oxide Nonlinear Resistor Varistor
Popular Lightning Protector Products
9kv Metal Oxide Lightning Protector Arrester for Outdoor
Station Class 30kv 33kv Polymer Polymeric Metal Oxide Lightning Arrester
Latest Electrical Equipment 444kv High Voltage Surge Protector Arresters
High Quality Lightning Sound Arrester
132kv Silicone ZnO Surge Protector for 500kv Transmission Lines
Power Line Low Voltage 3kv Surge Lightning Arrester
Popular Surge Arrester Products
12kv Silicone Polymer Housing Composite Metal Oxide Surge Arrester
Lighting Arrester/Lightning Rod Lightning Arrestor
Thunder Arrester Polymeric Composite Lightning Surge Arrester
24kv Polymeric Housed Metal Oxide Surge Arrester
Electrical Porcelain 33kv Lightning Arrester Surge Arrester High Voltage
Popular Surge Protector Products
11kv/24kv Station Class Polymeric Lightning Arrester with Bracket
Lightning Arrester Disconnector Surge Arrester Lightning Protector Surge Protector
0.25~765kv Rubber Porcelain Housed Metal Oxide Lightning Arrester
D52 Nonlinearity Zinc Oxide Varistor for Surge Arrester
Class 1 33kv Metal Oxide Gapless Lightning Surge Arrester
Yh10W-15 Lighting Arrester 10ka
Tags: hzyddq, Lightning Protector, Surge Arrester, Surge Protector