Suspension Clamp

Suspension Clamp image

Get Latest Price Request a quote

Quick Details

Product Name:

Suspension Clamp

Model NO.:

OEI-15

Type:

Link Fittings

Usage:

Line Fittings

Standard:

Technics:

Injection Molding

Origin:

China Nangyang

HS Code:

85472000

Product Details

MV and LV Line Accessories
Suspension clamp
MV and LV Overhead line accessories for use in the distribution overhead power lines of network.
The items in this document are intended to be used with a 33kV system at altitudes of up to
3000m.

The clamp should be designed to hang LV-AB cable with insulated neutral messenger. The
neutral messenger should be fixed by an adjustable grip device.
The suspension clamp shall be manufactured from weather and UV light resistant reinforced
nylon and aluminum alloy. The clamp should provide an additional insulation between the
cable and the pole.
Clamps should be fixed with pole by eyehook/bracket. Breaking load should not be less than
15kN
Suspension Assembly is used for supporting an ABC by installation on the messenger at an
intermediate point of support such as a pole. It can accommodate small angles of deviation up
to 30^o. The clamp should hold insulated messenger of diameter range from 6mm up to 12 mm.
Visual examination
Dimensional and material verification
Tensile strength
Dielectric voltage test
Climatic & corrosion ageing
Endurance test under mechanical and thermal stresses
Electrical ageing

TYPE:APG-C4
NAME:Parallel groove clamp APG-C4
Specification

Material
Material standard
Range of conductor cross-section	16…50/2.5…35
Range of conductor diameter, Al/Cu	mm²
Tensile strength	KN	5
Thickness of zinc coating,	mm	43
Test voltage at 50Hz for one minute in water	kV	6