Bolted Tension String D Shackle Ball Eye Socket/Tongue and Bolted Tension (four U Bolts) Clamp
Bolted Tension String D Shackle Ball Eye Socket/Tongue and Bolted Tension (four U Bolts) Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
We are China Bolted Tension String D Shackle Ball Eye Socket/Tongue and Bolted Tension (four U Bolts) Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
100mm2 Bare Conductor All Aluminium Alloy Conductor AAAC Conductor
Pulling Clamp with Pulley for ACSR 120‘ 20 mm2 Conductor
Aluminium Conductor Steel Reinforced ACSR Hare Conductor
Overhead All Aluminum Conductor 132kv High Voltage AAC Conductor
Most Favored Type All Aluminium Conductor
Popular jgtrade1 Products
3.5kv DC Withstand Voltage Test Instrument
High Voltage 11kv Electrical Insulation Standard Disk Suspension Type Glass Insulator
Jla-3 Special Grounding Wire for Power Plant
Porcelain Insulator Type Spike 24.9 Kv, Thread 1-3 / 8 ", ANSI 56-1
Yh10W-54, 54kv 10ka Surge Arrester
Popular Pole Line Hardware Products
Forged Oval Shoulder Eye Bolt Hot DIP Galvanized
High Strength Brass T/J Imported Copper Bolt Connector
ANSI Standard Pole Line Fittings Insulator Spindle Insulator Pin
Long Shank Crossarm Pin for Overhead Line Fitting
Socket Eye for Pole Line Hardware
Popular Tension Clamp Products
15kn Strain Clamp for Polymer Suspension Insulator
Aerial Wedge Type Tension Clamp Nxj-3
Malleable Iron Bolted Gun Type Dead End Strain Clamp
FTTH Type Flat Outdoor Anchor Drop Wire Clamps Ension Clamps
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp