Come-Along 50-150mm Grip Pull & Tension Unsheathed
Come-Along 50-150mm Grip Pull & Tension Unsheathed image
Get Latest Price Request a quote
Quick Details
Product Details
WITH 3 U-BOLTS
Cast steel hot dip galvanised
The minimum failing load shall be indelibly marked on
each Pistol clamp.
Come along suitable for gripping ACSR conductor and metal rods
Aluminum alloy wire grip
TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
Al 25-240mm² Size 62*58mm Double-bolts Bolt M10*60 Weight 280g
3.6 | The throat of the staple will present a diameter range |
mm | 26.42 | |||||||
3.7 | Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver, |
º | 30º | |||||||
3.8 | Suspension clips present a breaking load |
kg | 11,340 | |||||||
3.9 | Minimum weight of zinc deposited in the hot galvanized steel |
g/m² | 915 | |||||||
3.10 | Minimum weight of zinc deposited in bolts, nuts and washers |
g/m² | 400 | |||||||
3.11 | Dimensions and drawings | mm | yes | |||||||
3.12 | ASTM standards | ASTM 123/153 |
Material
Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet
4.3 | The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel |
yes | ||||||||
4.3 | ACSR 556 conductor diameter. 4MCM not including the rod |
mm | 23.54 | |||||||
4.5 | Breaking load | kg | ||||||||
4.6 | The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted |
0° o 30°. | ||||||||
4.7 | Weight of zinc deposited on steel | g/m² | 915 g/m². | |||||||
4.8 | Zinc weight deposited on bolts, nuts and washers | g/m² | 400 g/m². | |||||||
4.9 | Weight | kg | ||||||||
4.1 | Dimensions and drawings | yes | ||||||||
4.11 | ASTM standards | ASTM 123/153 | ||||||||
4.12 | Attach to the staple | Norma IEC 60471. |
Stainless steel A2 bolts and nuts available according to order.
6.3 | The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper |
yes | ||||||||
6.4 | ACSR conductor section 556.4MCM |
mm² | 327.93 | |||||||
6.5 | Length | m | ||||||||
6.6 | Breaking load | kg | ||||||||
6.7 | Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension." |
yes | ||||||||
6.8 | Each rod that forms the joint must have a mark in its center with indelible ink |
yes | ||||||||
6.9 | Weight per unit | kg |
We are China Come-Along 50-150mm Grip Pull & Tension Unsheathed manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Doeble-Bolts Products
Strain Clamps Clevis Pistol (GUN) ACSR 50mm2 Complete with 3 U-Bolts
Pole Line Hardware Fittings Galvanized Aluminum Alloy Strain Clamp
Strain Clamps Clevis Pistol (Gun) ACSR 100mm2 Complete with 3 U-Bolts
Electric Power Accessories Sand Casting for Strain Clamp
Popular Grip Products
Galvnized Dead End Guy Grip for Overhead Conductors
Preformed Grip Dead End for ADSS Opgw
Dead End Guy Grip Clamp for Earth Wire Power Fitting
Preformed Guy Dead Grip Ends with Factory Direct Selling
Popular jgtrade1 Products
11kv 100A Expulsion Porcelain Type Fuse Cutout
Jns 4 Core Clustered Type Tensioon Clamp
Low Voltage Draw out Switchgear (ggd)
Guy-Grip Dead-End Clamp for Gsw
Type “ -” Earthwire to Earthwire
Popular Strain Clamp Products
Suspension Clamp/Strain Clamp with 3 Bolts
Nll-1 Aluminium Alloy Clamp Aluminum Strain Clamp Tension Clamp
Aluminum Alloy Strain Clamp (Bolt Type)
Nld-2 Bolt Type Hot-DIP Galvanized Tension Clamp Strain Clamp Power Fittings
Tags: Doeble-Bolts, Grip, jgtrade1, Strain Clamp