Outdoor Electric Line Discharge Level 1 to 5 Porcelain Lighting Arrester 110kv
Outdoor Electric Line Discharge Level 1 to 5 Porcelain Lighting Arrester 110kv image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
Type | Y10W5-108/281 |
Rated Voltage———kV | 108 |
MCOV —————-kV | 86 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 325 |
8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 274 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 215 |
1mA D.C reference voltage (kV) | 157 |
Line discharge level | 3 |
2mS long duration impulse current A | 850 |
4/10µS High current impulse kA | 100 |
Lightning impulse withstand kV | 550 |
Power frequency voltage withstand(dry/wet)kV | 230 |
0.1S TOV————–kV | 129.6 |
1S TOV—————-kV | 124.2 |
10S TOV—————kV | 118.8 |
1200S TOV————-kV | 108 |
Creepage distance —-mm | 3906 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | |||||||
48HZ<Rated frequency<62HZ | |||||||
Power frequency voltage should not be more than continuous running voltage | |||||||
Max wind speed should be less than 35m/s | |||||||
Earthquake intensity should be less than 7 degree | |||||||
If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China Outdoor Electric Line Discharge Level 1 to 5 Porcelain Lighting Arrester 110kv manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
110kv Ploymer Housed Surge Arrestor with Leave Device
Zinc Oxide Silicon Rubber Grey Surge Arrestors/Arresters
Pole Mounted Isolating Switch for AC System
Gw16Chinese Outdoor Semi Pantograph Disconnector 245kv
Electrical Wholesale Trading High Voltage 33kv Dropout Fuse
Veiki Tested High Voltage Isolating Switch Outdoor
Popular Lightning Arrester Products
Sharp Top Composite Polymeric Surge Arrester Lightning Arrester with Disconnector
35kv Silicon Type Surge Arrester Cma5wc-51/134
11kv Zinc Oxide Surge Arrester
Lightning Arrester Surge Protection Device
24kv Metal Oxide Lightning Arrester for Overvoltage Protection
Popular Surge Arrester Products
36kv High Quality Electrical Surge Arrester for Transmission Line
Polymer Metal-Oxide Lightning Protector/ Surge Arrester (YH10W)
15kv High Quality Oxide Zinc Surge Arrester for Substation
Heavy Electrical Equipment Substation Polymeric Lightning Arrester Hoop
Compound Oxide Surge Arrester Yh5w-6L
5ka Yh10W 12kv Silicon Rubber Surge Arrester
Popular Surge Arresters Products
Porcelain Housed Lighting Arrester for Power Station
D31 Metal Oxide Varistor for Surge Arrester
Line Discharge Level 1 Porcelain Arrester Lightening Arrester with External Gap
Line Lightning Protection 120kv 10ka Silicone Housing Lightning Arrestor
L&R 15kv 10ka Surge Protector Lightning Arrester
200kv Metal Oxide Surge Diverters for Electric Station
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters