Surge Protection Device Suppressor Arrester
Surge Protection Device Suppressor Arrester image
Get Latest Price Request a quote
Quick Details
Product Details
High Voltage Substation Lightning Arresters Manufacturers of 66kV Surge Arrester
0.25kV~750kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Surge Arresters’ Technical Parameters:
Type | Y10W5-66/176 |
Rated voltage———kV | 66 |
MCOV —————-kV | 52.8 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 221 |
8/20μS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
1mA D.C reference voltage (kV) | 96 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10μS High current impulse kA | 100 |
Lightning impulse withstand kV | 325 |
Power frequency voltage withstand(dry/wet)kV | 140 |
0.1S TOV————–kV | 79.2 |
1S TOV—————-kV | 75.9 |
10S TOV—————kV | 72.6 |
1200S TOV————-kV | 66 |
Creepage distance —-mm | 2500 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition: | Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | ||||||||
48HZ<Rated frequency<62HZ | ||||||||
Power frequency voltage should not be more than continuous running voltage | ||||||||
Max wind speed should be less than 35m/s | ||||||||
Earthquake intensity should be less than 7 degree | ||||||||
If used in contamination area, should be noted in advance. |
Lightning Arresters Production:
We are China Surge Protection Device Suppressor Arrester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arrester Products
Polymer Metal Oxide Lighting Arresters Composite Surge Arresters
Yh10W-9 9kv Polymer Polymeric Lightning Arrester
Low Voltage Type Surge Arrester
20ka-40ka DC500V Solar Surge Arrester
33kv Composite Zinc Metal-Oxide Arrester Lightning Arrester
Hangzhou 24kv Porcelain Polymeric Metal-Oxide Lightning Arrester Price
Popular hzyddq Products
33kv 10ka High Quality Silicone Housed Gapless Surge Diverters
Electric Three Phase Isolator Switch with Motor
Pd1 24-27kv Porcelain Fuse Cutout
Active Lightning Arrester Surge Protection Device
Ceramic Insulator Suspension Insulator
Silicon Rubber Glass Composite Insulator
Popular Surge Arrester Products
33kv High Voltage Electrical Surge Arrester for Transmission Line
Electric Porcelain Housed 120kv Surge Arrester Without Gap
Polymeric Material Surge Arrester for 36kv/100A
Xirui Factory Bulk 6kv 10ka Metal Oxide Silicone Rubber Gapless Lightning Arrester
Outdoor Single Pole Fused Recloser by-Pass Switches 35kv
Polymer Lightning Arrester Metal-Oxide Arrester (12kv, 15kv, 24kv, 27kv, 33kv, 36kv)
Popular Surge Protector Products
1 24kv 10ka Surge Arrester for 220kv Transmission Line
Rated Voltage 27kv Lightening Arrester/Hangzhou Professional Manufactory
30kv 5ka Surge Arrester Ceramic Housing Lightning Arrester in Fuyang
Yh5w-18 Polymeric Silicone Rubber Lightning Arrester
High Voltage Electric Power Line Material Surge Arrester Manufacturers Europe
High Voltage Silicone Rubber Lightning Arrester
Tags: Arrester, hzyddq, Surge Arrester, Surge Protector