Surge Protection Surge Protector Arrester
Surge Protection Surge Protector Arrester image
Get Latest Price Request a quote
Quick Details
Product Details
High Voltage Substation Lightning Arresters Manufacturers of 66kV Surge Arrester
0.25kV~750kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Surge Arresters’ Technical Parameters:
Type | Y10W5-66/176 |
Rated voltage———kV | 66 |
MCOV —————-kV | 52.8 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 221 |
8/20μS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
1mA D.C reference voltage (kV) | 96 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10μS High current impulse kA | 100 |
Lightning impulse withstand kV | 325 |
Power frequency voltage withstand(dry/wet)kV | 140 |
0.1S TOV————–kV | 79.2 |
1S TOV—————-kV | 75.9 |
10S TOV—————kV | 72.6 |
1200S TOV————-kV | 66 |
Creepage distance —-mm | 2500 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition: | Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | ||||||||
48HZ<Rated frequency<62HZ | ||||||||
Power frequency voltage should not be more than continuous running voltage | ||||||||
Max wind speed should be less than 35m/s | ||||||||
Earthquake intensity should be less than 7 degree | ||||||||
If used in contamination area, should be noted in advance. |
Lightning Arresters Production:
We are China Surge Protection Surge Protector Arrester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arrester Products
Yh10W-9 9kv Polymer Polymeric Lightning Arrester
Lightning Arrester Without Gaps Transmission Line Surge Protector
11kv 10ka Composite Polymer Distribution Lightning Surge Arrester
Distribution Type Surge Arrester Post Type Lightning Arrester
(Y10W-10) High-Voltage Porcelain Lightning Arrester
Popular hzyddq Products
China Best Lightning Arrester 5ka, 36kv
132kv Polymer Gray Red Surge Arrester
Surge Protection Lightning Insulator Arrester
Protection Over Voltage 12kv 10ka Metal Oxide Polymer Lighting Arrester
Power Equipment 6-9kv Electrical Surge Arrester Low Voltage
12kv Hv Porcelain Ceramic Drop out Fuse with Fuse Tube
Popular Surge Arrester Products
Polymeric Housed Metal-Oxide Lightning Arrester
Xirui Factory Bulk High Voltage Polymer Ceramic Porcelain ZnO Surge Arrester
Yh5w Polymeric Housed Metal-Oxide Lightning Surge Arrester Without Gaps
45kv Porcelan Pin-Type Insulator
Stainless Steel Telescopic Fence
11kv Silicon Surge Arrester Cmr5w-11 33kv Porcelain Lightning Arrester Metal Oxide
Popular Surge Protector Products
Tested 3-18kv Surge Arrester Caps ZnO Silicone Lightening Arrestor
IEC60099-4 132kv High Voltage Metal-Oxide Lightning Surge Arrester for Substaion
Station Class Surge Arrester Rated Voltage 21kv/Electrical Arrestor
Low Voltage Station Type Surge Protection Surge Arrester 220V
220kv Transmission Line Type Polymeric Lightning Arrester Accessories
Kema Tested 3kv 12kv 15kv Polymer Metal-Oxide Lightning Surge Arrester
Tags: Arrester, hzyddq, Surge Arrester, Surge Protector