12kv High Voltage Drop out Fuses

12kv High Voltage Drop out Fuses image

Get Latest Price Request a quote

Quick Details

Product Name:

12kv High Voltage Drop out Fuses

Model NO.:

DTF-12KV

Standard:

IEC IEEE

Fusing Device:

Fuse Link

Fusing Speed:

T K

Shape:

Circle

Usage:

High Voltage

Type:

Distribution

Breaking Capacity:

High

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

85351000

Product Details

The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.

Performance Characteristic
Applied standard	IEEE C37.42-2009
Catalog number
Nominal system voltage kV	33
Rated Frequency Hz	50
Rated m aximum(design) voltage	38
Rated Continuous current A-RMS	100
Rated Interrupting current asymmetrical/symmetrical A-RMS	8000/5000
BIL 1.2×50 µs kV-peak	150
Minimum critical impulse flashover voltage(CFO)KV peak	165
Dry withstand voltage kV-RMS	70
Wet withstand voltage kV-RMS	60
Creepage distance to group Min.mm	650
Minimum creepage factor of insulator (Creepage Distance/arcing distance)	2.3

HIGH VOLTAGE EXPULSION TYPE FUSE LINKS

                                           TABLE OF CONTENTS

ITEM                                                                                                                           TITLE                                              PAGE

PART 1 GENERAL

1.01                                                                                                                             SCOPE                                                    E13 1

1.02                                                                                                                             STANDARDS                                                E13 1

1.03                                                                                                                             SERVICE CONDITIONS                                           E13 2

1.04                                                                                                                             SYSTEM CONDITIONS                                     E13 2

1.05                                                                                                                             TESTING                                                       E13 2

1.06                                                                                                                             SPARES                                                         E13 3

1.07                                                                                                                             PACKING AND SHIPMENT                                    E13 3

1.08                                                                                                                             SUBMITTALS                                               E13 3

PART 2 PRODUCTS

2.01                                                                                                                             DESIGN                                                         E13 4

A.                                                                                                                    Standardization of Fuse Links                       E13 4
B.                                                                                                                    Rating of Fuse Links                                      E13 4
C.                                                                                                                    Characteristics of Fuse Links                                 E13 4

2.02                                                                                                                             MATERIALS                                                        E13 4

A.                                                                                                                    Current Carrying Parts of Fuse Links                                  E13 4
B.                                                                                                                    Fuse Link Button                                     E13 5
C.                                                                                                                    Length of Fuse Links                                      E13 5
D.                                                                                                                    Pull on Fuse Links                                          E13 5
E.                                                                                                                     Identification                                                  E13 5

TECHNICAL DATA SCHEDULE                                                                                           E13 6

PART 1           GENERAL

1.01       SCOPE

This Specification covers the design, manufacturing, testing, supply, delivery and performance requirements of HV Expulsion Type Fuse Links for use by the Electricity Company of Ghana Limited.

1.02     STANDARDS

The fuse links shall comply with the latest editions of and amendments to, the standards/specifications listed below:

IEC                                                   –      International Electrotechnical Commission

IEC 60282                                 –      High Voltage Fuses Part 2: Expulsion and similar fuses

ANSI                                                      American National Standards Institute

IEEE C37.41                             –      Design for High Voltage Fuses, Distribution Enclosed Single Pole Air Switches. Fuse Disconnecting Switches and Accessories.

ANSI C37.42                             –      American National Standard Specifications for Distribution Cutouts and Fuse Links.

NEMA                                                    National Electrical Manufacturers Association

NEMA SG2                               –      High Voltage Fuses

1.03     SERVICE CONDITIONS

As in Specification H0C

1.04     SYSTEM CONDITIONS

As in Specification H0C

1.05     TESTING

Type Tests

A.        The Supplier shall confirm on the attached schedule that the following tests have been performed according to ANSI C37.42.

1.         Melting Current Tests; Table 6

2.         Temperature Rise Tests

3.         Time/Current Characteristic Tests

B.        Type/Design Tests may (at the Purchaser’s discretion) be dispensed with if the Supplier/Contractor furnishes evidence to the Purchaser’s satisfaction that the relevant tests have already been performed on identical equipment. In this case the Supplier shall provide documentary proof in the form of Certified Test Certificates that the assembled equipment and its component parts been successfully typetested by an independent testing authority in accordance with the relevant clauses of referenced Standards. Test Certificates as evidence of successful completion of type tests shall be submitted as part of the Bid.

C.        Inspection

The Purchaser reserves the right to witness the manufacturing process, any type tests specifically performed on the materials to be supplied to Customer and any routine tests required in the manufacture and supply of such equipment. The Supplier shall provide free access to the Purchaser to any site where such manufacturing process, or tests, either type or routine tests are taking place. The Supplier shall bear the in plant costs of such witness. The Supplier shall provide the Purchaser of a schedule of manufacture and tests at least two weeks before the events are to occur.

1.06     SPARES

(NOT APPLICABLE)

1.07     PACKING AND SHIPMENT

As in Specification H0C


1.08     SUBMITTALS

As in Specification H0C

PART 2           PRODUCTS

2.01     DESIGN

A.        Standardization of Fuse Links (Mechanical/Interchangeable).

High voltage expulsion fuses shall be suitable for use on the Expulsion fusegears described in the associated specifications H16 and H34.

B.        Rating of Fuse Links

The preferred rating of fuse links shall be 3A, 5A, 8A, 16A, 25A, 40A, 63A and 100A at 11kV and 1A, 2A, 3A, 5A, 8A, 16A, 20A and 31.5A at 33kV. The rated current of the fuse link is the maximum current which it will carry continuously without deterioration and undue heating. Supplier shall state on the attached schedule the maximum temperature in ^oC attained by the fuse link after continuous operation at maximum rating.

C.        Performance Characteristics of Fuse Links

1.         The fuse links are required to give protection against short circuits. They shall be so rated and shall have such blowing characteristics as to be suitable for selective operations with the fuse links at present in use on the system namely Type K i.e. fast, fuse links to NEMA SG2 and ANSI C37.42 1981.

2.         The Supplier shall present to the Purchaser timecurrent characteristics of all the distribution fuselinks on offer. The performance characteristics of the fuselinks shall include:

(a)        Meltingtimecurrent characteristics
(b)        Total clearingtimecurrent

The timecurrent characteristics shall be presented as curves.

The Supplier shall state the minimum and maximum melting currents required to melt the fuse links at the three appropriate time points used in Table 6 {meltingcurrents for TypeK (fast) fuse links) of ANSI C37.42 1981

2.02       MATERIALS

A.        Current carrying Parts of Fuse Links

All current carrying parts of the fuse links shall be nonferrous material; the main requirements being resistance to atmospheric corrosion. Tin is not acceptable as a possible element.

Supplier shall state composition of:

1.         Fuse Element

2.         Fuse Link

B.        Fuse Link Button

The diameter of the button head cap on fuse links shall be 19.1mm. Removable type button heads are preferred for use with 11kV fusegear.

C.        Length of Fuse Links

The minimum overall length of fuse links rated 1 to 100 amperes shall be:

:           510mm for 11kV units per ANSI C.37.42

:           762mm for 33kV units per ANSI C.37.42

D.        Pull on Fuse Links (Tensile Withstand Strength)

The expulsion fusegear shall operate satisfactorily while exerting a pull of 44.5N on the fuse link per ANSI C.37.42, 3.2.3.4 1981.

E.         Identification

Each fuse link must have stamped on it:

1.         Manufacturers name or identifying mark

2.         Continuous current rating

3.         Type designation, K or T

We are China 12kv High Voltage Drop out Fuses manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote