Single Phase Pre-Payment Split Energymeter - RF Communication

China 
                Single Phase Pre-Payment Split Energymeter - RF Communication
              manufacture and supplier

Single Phase Pre-Payment Split Energymeter - RF Communication image

Get Latest Price Request a quote

Basic Info.

HS Code
73269090

Production Capacity
7000

Product Description

Thimble Clevises are used for deadending

conductors to Suspension Insulators. The groove
diameter will fit the eyes of standard Eyebolt up to and
including 3/4 Inch diameter.

Tension Clamp For Aluminium Conductor  
                  TECHNICAL SPECIFICATION
1.    SCOPE
      This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.      
       The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2.              STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973    –    Insulator and Conductor fitting for
                    Overhead Power Lines
BS 729          –    Hot dip Galvanised
3.              ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4.              DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5.              SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a.                  50mm2 Alu. Conductor
b.                  100 – 150mm2 Alu. Conductor
6.              MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7.              INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a.                  A  sample of the Tension Clamp complete with all accessories.
b.   A copy of the test report on tests conducted in accordance to BS 3288 and BS 729

 

We are China Single Phase Pre-Payment Split Energymeter - RF Communication manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular Chain shackle Products

Drop-out Fuse-Link Assembly 33kv

Mv Fuseholder

Manufacture Good Quality Custom Pipe Clamp Fittings

Socket Eyes Type W

_DSC3521-1

Stay Rodassemblm16conventiona

Popular jgtrade1 Products

Yh10W-12, Sharp Head 12kv 10ka Surge Arrester

11 Kv Porcelain Pin-Type Insulator

Spacers for 500kv Line Jumper Conductor

Load Break Switch 24kv 400A

Bimetallic Terminal of Compression for Driver N º 2 AWG (4 holes)

Terminal Connectors for Double Conductors Type Ssy, Compression Type

Popular Oval Eye Nut Products

Ground Rods

Single Polecircuitbreaker (63A) Suitable Forpolemountedsplitmeters

Oval Eye Nut Qen-4015

Suspension Clamps (With Clevis)

Thimble Eye Nut

5/8'' Oval Eye Nut Used for Deadending with Suspension or Strain Insulaotr

Popular Thimble Clevises Products

Laminated Copper Busbar

Mv Fuseholder

Pg Clamp100mm2

Single Polecircuitbreaker (63A) Suitable Forpolemountedsplitmeters

Thimble Clevis Electric Power Fittings

Insulator Hv Stay 140X90

Tags: , , ,

FAST AND RELIABLE SERVICE FOR YOUR PROJECT

Contact our trained experts today to find your perfect power solution.

ASK A QUESTION