66kv Ceramic Porcelain Housing Lightning Surge Arrester
66kv Ceramic Porcelain Housing Lightning Surge Arrester image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
Type | Y10W5-66/176 |
Rated voltage———kV | 66 |
MCOV —————-kV | 52.8 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 221 |
8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
1mA D.C reference voltage (kV) | 96 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10µS High current impulse kA | 100 |
Lightning impulse withstand kV | 325 |
Power frequency voltage withstand(dry/wet)kV | 140 |
0.1S TOV————–kV | 79.2 |
1S TOV—————-kV | 75.9 |
10S TOV—————kV | 72.6 |
1200S TOV————-kV | 66 |
Creepage distance —-mm | 2500 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | |||||||
48HZ<Rated frequency<62HZ | |||||||
Power frequency voltage should not be more than continuous running voltage | |||||||
Max wind speed should be less than 35m/s | |||||||
Earthquake intensity should be less than 7 degree | |||||||
If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China 66kv Ceramic Porcelain Housing Lightning Surge Arrester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Polymer/Porcelain Zinc Oxide Gapless Arrester for Power Distribution System
High Voltage Surge Arrestors Silicon Metal-Oxide Lightning Arrester Price
198kv Line ZnO Polymer Housed Lightning Surge Arrester
Good Price of Cable Lightning Arrester with High Quality
10kv 11kv 15kv 20kv Disconnect Switch Load Isolation Switch (gw9)
Hpd 12-15kv Polymer Housing Fuse Cutout
Popular Lightning Arrester Products
Yh5w-18 Polymeric Silicone Rubber Lightning Arrester
Polymeric Housed Metal-Oxide Surge Arrester Without Gaps
Yh10W-45, Sharp Head 45kv 10ka Surge Arrester
Yh10W-66, 66kv- 10ka Surge Arrester
Popular Surge Arrester Products
Polymeric Material Surge Arrester for 12kv/100A
30 Kv Metal-Oxide Polymer Surge Arrester with Bracket
36kv High Voltage Electrical Surge Arrester for Transmission Line
120kv Polymeric Housed Metal Oxide Surge Arrester
(Y10W-33KV) Porcelain Housed Metal-Oxide Surge Arrester Without Gaps
Clj Imported Copper Bolt Connector
Popular Surge Arresters Products
12kv Polymeric Housed Metal-Oxide Lightning Surge Arrester Without Gaps
High Voltage Electric Silicone Porcelain Surge Arrester 36kv to 110kv
33kv Polymer Housed Lightning Arrester
Class1 Line Discharge Level 21kv 5ka Polymeric Composite Lighting Arrester
33kv Hv Polymeric Housed Silicone ZnO Gapless Lightning Arrestor
Innvoation Electrical Station Class Porcelain Surge Arrestors
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters